I want to reset factory Dell printer 3110
For the 3100cn, once the web password has been set, you need to do a deep NVRAM reset to clear it.
Before doing anything, print a Printer Settings page so you know what your printer settings are, espcially page count. I might advise dating and saving this for possible future reference
Here's how to deep reset NVram for the 3000/3010/3100cn printers:
1. Pwr Off
2. Hold the Left + Right + Menu buttons while you Pwr-on (release them when display = DIAGNOSING...)
3. At the PASSWORD prompt, press UP, UP, [enter] (enter=center button)
4. Down button to INSTALLATION SET; [enter]
5. Down button to NVM Init; [enter]
6. OK?, [enter]
7. After completion message, Pwr off, wait 5 secs, then pwr on
After pwr on, the LCD displays "Init NVram" & "Initializing", then completes POST with "Diagnosing".
After printer completes POST, the toner level indicators on the LCD may show empty. The printer will need to be Pwr'd Off/On once again to correct display.
The procedure for the 3110cn is nearly identical. Let me know if you have problems figuring it out.
SOURCE: Dell 3110 printer error message 093-922 -- I have
Try turning your printer off, wait 10 seconds, then turn it on again and see if the problem persists.
SOURCE: I need a manuel for the Dell 3110CN printer
click on the following link
http://support.dell.com/support/topics/global.aspx/support/my_systems_info/manuals?~ck=ln&c=us&l=en&lnki=0&s=gen
download the maual and print it if yu want.
SOURCE: How to reset to factory default Dell 1720 network printer
1. Turn off the printer
2. Open the front cover.
3. While the Continue and Cancel buttons are depressed, turn the printer on.
4. When the error LED on the control panel is lit solid, close the cover.
3,150 views
Usually answered in minutes!
×