Ge washing machine, trying to find out if model is a heavy duty washer model #WJSR2070B2WW serial # HF193930G

Hello Consumer. We truly apologize for the frustrations you have experienced with your washer. If you would like us to look further into your concerns, please email us directly at [email protected] . Please include your name, YouTube User ID, complete contact information, the full physical address where the washing machine is located, along with the model and serial numbers. Sincerely, Andre W.

Yours is a 2 speed motor. Does it spin in 2 different speeds. If so, then it most likely is designed with only to agitate in 1 speed. If it only spins in one speed, then your motor is defective

Is it unbalanced?

Hi.... you have something in your drain pump or you need new pump ....

no esprime

You need to check the lid switch for continuity. A bad lid switch will prevent this machine from agitating or spinning.

I couldn't find the exact size using the model number provided... i would bet that it's a 3.5 - 4 cu.ft. model... My suggestion is to get something other than a GE washing machine... Go with a Kenmore, Whirlpool or Maytag

either a bad pump or a worn or missing belt, lean machine back and check your belts

Please post back with your COMPLETE serial number (usually located along the wash tub rim under the lid) to include any letter designations. This determines when the appliance was manufactured. The model number you provided crosses to a dryer. If this is a dryer, the serial number will be find along the door opening. Please confirm your model number as well. The number should begin with a "110" prefix. You listed this as a kenmore heavy duty...and listed it under washing machines. If this is a washer, I will need a more accurate model number (if possible) to be able to determine part sources for you.

Probably the drain pump seal has gone bad.
Check it for leaks.
If your floor is good and level look for water near the front center of the machine.