HOW TO HOOK UP RCA CRF 907 MODULATOR TO TV WOMEN ALONE IN WHEELCHAIR NEEDS YOUR HELP TRYING TO SET THIS UP TO SUBSCRIBE TO NETFLIX STREAMING..HOUSEBOUND!....I HOOKED UP THE ROKU XS TO THE CABLE BOX AND THE WIRED ROUTER. I DIDN'T HAVE 3 INPUT PLUGS OPEN IN THE TV AND WAS TOLD TO BUY THE RCA CRF 907 MODULATOR. I PLUGGED THE THREE WIRES RED/WHT/YELL INTO THE MODULATOR AND PLUGGED THE AC INTO ELECTRIC...WHAT KIND OF COAXIAL WIRERS DO I USE ON THE OTHER END OF THE MODULATOR AND WHAT DO I PLUG THEM INTO? IF TV WHERE? THANK YOU SO MUCH
Hi, after a lot of searching I found all your bits but not too sure on the TV itself as it's not showing connections on the rear.
However as far as I can see, based on the device and your question, it looks like the standard old style coax goes from the CRF 907 TV OUT socket to your TV's ANT. IN socket.
I hope this helps.
SOURCE: RCA 52" tv. model # D52W20
The silver box is called the TUNER. Call an RCA distributor, such as Union Electronics or Herman-Panson and order it by description by asking for the tuner for your model number. Have the location number on the board, just in case.
SOURCE: Problem hooking up DVD player to TV thru my cable box
Chances are you've got your DVD player hooked to OUPUT jacks on the cable box, not inputs. I haven't yet seen a box that takes any kind of an input other than the cable line, but they will have RCA jacks for audio and video outputs on the back. So your cable channels are fine, but the DVD signal is hitting a dead end.
The only solution if your TV doesn't have RCA inputs for video and audio is to get an RF converter (around $10-$20). This takes the A/V signals from your DVD and turns them into a channel 3 or 4 signal that connects to your TV's antenna input.
The converter also has a connector on the back for the cable coming from the cable box, since you'll have to disconnect that from the TV. When the DVD player is off, the cable box signal gets passed to the TV as normal. Turn on the DVD player and the RF converter switches on; put your set on channel 3 or 4 and you'll see your video.
One final thing: The converter will need an AC outlet for its power adapter or power cord, so make sure you have a spare. If you don't already have your TV and DVD player connected to one, this would be a good time to pick up a surge-protector outlet strip. Then not only will you have enough outlets, you'll be protecting your equipment as well.
If this solution has given you what you need, please take a moment to rate it appropriately. And thanks for asking here!
Testimonial: "Thank you. I forgot to thank you when I first read this response. Works fine now though :)"
SOURCE: connection for digital signal box
You'll need a coax to twin lead transformer that you can buy from Radio Shack.
SOURCE: Instructions to hook up a Thompsen/RCA model CFR940 video source selector with RF modulator
i need a diagram
SOURCE: Can i hook up converter box to tv with rca jacks because coaxial plug is broken thank you
Only if set has RCA inputs for video and audio.
115 views
Usually answered in minutes!
×