Magellan 3225 - frozen on start up page

If it won't connect then about all you can try is a hard reset. That will force it to reload all of the applications and reset it back to factory default condition. You would loose any waypoints and routes etc that you haven't saved but it should work just fine after that.

Press the hard reset button on the left one time. It is small pin-hole button. You will lose all stored info and the GPS should go back to factory default.

Create an account on their website and download the firmware update. It is free and I have done it.

i had the same problem i hooked it up to the usb on my computer then power cycled it( reset then turn on then hold the power button for 15seconds) i did that about 3 or 4 times and then it worked

sceen locked on Magellan logo AND STATUS BAR

Does the battery hold a charge? Try pressing the RESET button. The Magellan site though very slow may be able to help or make recommendations...Now a days it may be cheaper to buy a new one than fix the old one

Same here - the problem, at least with mine, is that the power pin on the unit has become loose and not making contact with the machine - thus will not charge most likely from pluging and unplugging it in multiple times and breaking the connection inside the unit - FWIW, this GPS a real piece of **** and I have already replaced it with a Garmin- I'm trying to figure out how to take it apart to see if I can solder the power pin back in place but it is not as easy as removing the 4 back screws...

go to the magellen website i did i bought the gps on ebay,then went to the website to register and to download the adobe format 3225 manual,here it is https://www.magellangps.com/products/product.asp?segID=408&prodID=1992

I need to update the map on my 3225 Magellan Maestro, can anyone help?

Its very simple to reset the time just follow the steps given bellow.
---> Click on OPTIONS.
---> Click on USER SETTINGS.
---> Click on TIME ZONE.

So when you click on the time zone you can rest time.......