Timer buzzer keep going off with the code F 7 beside the time. What does this mean?
Stove is Kenmore drop in range approximatley 15 years old , number on the door 3263B1016P001
Pls advise.
many thanks,
Pam
Hi
Error
code F7 means that an error with the keypad has occurred. Usually it happens
due to loose ribbon cable on the keypad or the electronic control assembly
itself going bad. To resolve this issue first, disconnect the power to unit and
then gain access to the back of the clock assembly (Electronic Range
Control/ERC). Now unplug the touch pad ribbon connector from the ERC, it would
be a flat wire approx. 1 1/2" to 2" wide and make sure that the cable
is not broken and nothing is shorted on the keypad. After this is done insert
the cable back and then plug the unit back to check. If the error is still
there then the electronic control board should be replaced. Hope
this helps...please post back for further assistance.
Daniel
427 views
Usually answered in minutes!
×