Fix code 104 - Fisher and Paykel GWL11 Top Load Washer

Yes error code 104 if you are counting from the left. Pushing power & start should not bring up an error code. Makes me think there is more going on than is obvious. Why did you replace the display board? If you did it just in the off chance it may fix the problem then that is the wrong thing to do. You are only wasting money buying random parts. Would be cheaper in the long run to call someone out to repair it and test it properly. You get no warranty from F&P if you fit those parts yourself.

ok guys remember model and brand of the heater. check the control inside the house and read the temp. if over 104 replace water temp sensor. if not control,. heater as found a faulty code and mus be reset and or fix code problem

If you want to know what this is the error code is related to

Click start control panel administrative tools computer management then select event viewer this may vary depending on what operating system you have

extend the events there you will see errors in red you will no what exactly what the error was and at what time it occured

or click start type in event viewer press ENTER

you might be able work your way through the problem
if you need more help with this post a reply with the error message details

hope it helps

Hi, to connect nokia bh-104, you will have to use the default code which four zero's "0000" and your done ...

Have a nice day...

I dont owe one.

come si fa a ripararlo

Recovert code 104
would you like to recover your system?
NO
Repair disk
Format disk
P.S. pressed the OK button on the device and its telling me to
connectto your divise to my PC and install an update file DONE
then the devise reapear back to recovery code 104