Fuji FinePix f601z, Not powering On

Fuji FinePix Z2 Digital Camera

lens retracts fully into the body and is protected by an automatic metal cover - no more lost or dangling lens caps.
The F410 Zoom makes use of the new xD-Picture Card media that is smaller than a postage stamp. Fuji supplies a 16MB card and they are available now up to 256MB. The F410 is powered by a small proprietary lithium rechargeable battery. This battery pack performed well in our use and if the color LCD is used sparingly, I see no problem with the battery delivering enough power for a conservative day's use. As with any camera that uses a proprietary battery pack, it is always a good idea to purchase and carry a charged spare at all times. The included power supply / charger is an auto switch type and operates on 100-240V AC which is convenient when traveling. It charges the battery in 3 hours (or less) while in the camera and also functions as an AC power supply for extended use at home. The battery is also charged any time the camera is placed in the optional camera dock.

A few things here may cause the problem you have First the rechargeable batteries don't hold their charge like alkaline and will drop to zero or near zero voltage in just a few weeks. They may tun on a light but won't have enough power to operate a camera. When this happens you need to charge the batteries possibly twice. Another thing is if the batteries were left in the camera then it's very possible that the contacts down inside the battery compartment are corroded and need cleaning before proper connection can be made. One other thing is that the batteries have been installed out of sequence and I'm including a diagram for this.

Diagram

Check the battery that must be fully charged. Remove the memory card and try. fress the power button in camera few sec & see whats going on. After all these if your camera does on then the curcit board is damaged. You myst visit service center for repair the board. Thanks.

remove the xdcard and use compact flash. also put camera in set mode and run the battery drain function. it seems to reset the battery voltage meter. clean batery contacts with q-tip and rubbing alcohol. worked for me

my solution was low teck . Use velcro strips to keep door closed

get a new camera sorry thats an old thing when it runs out its out sorry

try getting new batteries.. sometimes the rechargable ones just lose the charge.. instead of rechargables try using throw aways. you can try and contact fuji but like myself and others they will just give you 5 differant numbers to call and the problem will not be solved

Is the battery fully charged? Or is the battery near the end of its useful life? Some batteries hold a charge better than others-- I have 2, both used well, and one seems to last longer than the other...

Fuji FinePitteryx refuses to power up,even after new lith. batteries were installed

I require the software to enable to download pictures for my
finepix fuji f601z