KENMORE ELITE SMART WASH QUIET PAK 4 FRONT LOADER,

There should be a button on the control panel that says "open door" you need to push that button and wait for the washer to shut off before you open the door. Try pushing that button to see if that resets. My guess is that you broke the safety latch when you opened the door and it will need repair.

This video will show you how to change a door seal on this Bosch front loader washing machine
You can find more Bosch videos in our Bosch repair channel

In regards to the dryer:
https://www.repairclinic.com/PartDetail/Kenmore-Dryer-Thermistor/WP8577274/1181075?modelNumber=110.85874400&ss=a8b6d703028&mr=1
The issue with the washer is related to issues on this page:
https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Washing-Machine/42-6-699046-/Kenmore-Washer-vibrating-or-shaking-11045994400

my kenmore washer elite11 leaks water in the rinse cycle on the floor.

the lock switch is probably stuck. make sure machine is off but plugged in still. Push in on the door while gently giving a couple of thumps around the lock area and the lock will probably "click" open.

The LOC code merely means the control responded and locked the door. You'll find a tech sheet under the top panel of the machine to help guide you thru the diagnostic process, which is fairly involved.

LOC means it thinks the control panel is locked. This gives the ERR indication when you push the buttons. To unlock it you need to hold down the Options and Select buttons together until it reacts.

I know this may seem silly but - On the top right back corner of your washer hit it with medium force with your fist, this helps.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

this is joyce
what kind of waher have you got? model #

its a inlet water supply error code check your cold fill line and fill screens at cold fill valve for block

Our washer is flashing a F21 and it never finishes the load there is always water left.. what can we do to fix it?

Hi! mingx2of06
So are any lights on, do you have power at the wall circuit.
InMrFixIt