I have cleaned gun inside and out. I have a full tank, no leaks, velocity is turned up. It shoots about 30 feet and only one shot at a time. I have to pull bolt back each time. What next?
SOURCE: I attempted to put a car stock on my Tippmann 98
Check the O rings on the big metal striker, make sure that you have the spring on the back (where the stock would have went) in the right hole on the back plate. Make sure that your velocity is set to a reasonable level.
SOURCE: i added a stock to my tippman 98 custom and it
Check and make sure that it's secured properly and that the spring is seated correctly in the back.
Make sure it's clean and lubed with a quality oil made for paintball.
If neither of those is the culprit keep trying to use it. The feel will definitely be a little different and it may just "seem" like it's not the same gun, because it's not. Some players like a stock, and some not, and some don't know until they've tried one. Practice with it for a while and see if you're view changes (assuming the above isn't an issue).
If you decide it has problems, check out your local airsmith and make sure everything else is in good shape.
Good luck!
Play hard, play safe, play with honor!
8^)
447 views
Usually answered in minutes!
×