SOURCE: help for Panasonic Lumix DMC-TZ 1
For a factory reset:
Turn on the camera, push the menu button, push left, down and then right.
You are now on SETUP menu.
Scroll up to the RESET option, push right and then answer YES two times.
SOURCE: Panasonic lumix DMC-ZS1 - won't record video
It might be telling you that the card you have in the camera isn't fast enough to keep up with the demands of a video recording. You need to buy a more expensive card with a faster speed rating.
SOURCE: Panasonic DMC-TZ3 goes right to 10X zoom
There is a solution to this problem discussed here http://www.fixya.com/support/t159240-buttons_stopped_working
517 views
Usually answered in minutes!
Several people have said check burst. When burst off, still no flash. Also, if select flash burst , I get a message ti open flash-when it is already open.
I stumbled onto the solution! The flash door was not opening completely, so with a little wiggling of the door it works. Thanks for the good suggestions. I will probably have to use these good ideas in the future.
×