I have a 2622 flat screen got sound no picture

Sorry we have no way to look this up here.

codes fit what remote 2622 2295 1218

Ur LCD inverter board is dead.Replaced this LCD inverter board u will get ur picture back.This a simple repair take ur tv aparts,take out the LCD inverter board,it a long shape of a board.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replament.U will get ur picture back.Ok,good luck,labors about an hour work.

check the oscillator

sounds like your picture bulb has blown!! not good they are very pricey!@ they only have so many hours so turn the tv off when you are not watching hope this elps ,, good luck!

Below is a link to your manual. Just copy and past it in your browser's address bar. It's in.pdf format so you'll need Adobe reader to view it. You can also copy it from the save button in the upper left side tool bar (little floppy disc icon).
Hop this helps.

http://www.memorex.com/manuals/Mltd2622engspamanual-6.16.pdf

Turn off the printer and place your finger on the green feed button. With the button depressed, turn the printer back on. Let the light flash (ONLY!) four times and release the button. Printer will cycle through 2-3 labels. Press the feed button one more time.
You've just set the printer back to factory default and dumped whatever setting told it to act as a fax.

replace the power pcb,very common with this
model.the 1000 mfd.50 volt capacitors blow the tops off or are pooched out.take the back off and you will see the problem.

Try 964-660-7028 or go to the Memorex.com, there is an 800 number there, good luck is all I can say!

Hii...

What is Philips TV model " no.21 pt 2622-69 " ?


Thank's
[Vrya]