Dialta di181 clear M4 error code - Minolta DiALTA Di181 Printer

Service mode, first

1.Press the Utility key.
2. Press the Meter Count key.
3. Press the following keys in this order:
Stop  0  0  Stop  0  1

for security "Stop 9"

In Security, Select Copy Kit
1. Touch "Set."
2. Press the Clear key to clear the current setting.
If the setting is accidentally cleared, press the Interrupt key to
undo the clearing operation.
3. Enter the desired value from the 10-Key Pad.
4. Touch "Current."
5. Press the Clear key to clear the current value.
If the current value is accidentally cleared, press the Interrupt key
to undo the clearing operation.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

a maintenance counter has to be cleared. this can only be done by a technician

Very, very old machine luck if you can get Windows 95 Maybe XP. Try

Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

SORRY NOT GOING TO HAPPEN Di181 is a legacy first generation digital copier at best try windows95? Try this if you do not believe



Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

This M4 code means that your drum life is over. You have run 80,000 copies or more on the drum. If you have a local service company available then I would just have them come out and clean the machine and reset the counter. This is especially true if your copies were still fine prior to the machine shutting down. Service mode entry and navigation is rather complicated on this machine so I do not feel comfortable trying to walk you thru the reset process.
Good Luck and Thank You for using Fixya.

This means that the drum has reached it life count of 80,000 copies. If your copies are good and the machine is still making copies the you can just ignore the M4 as if you are in the USA then the factory settting allows you to continue making copies. If the M4 appeared and you can NOT make copies then you will need to get into the service mode to turn the disable copy feature off or reset the count for the drum unit. Just let me know what your situation is and if need be we can walk you thru the reset. I just don't recommend this action unless it is absolutely necessary.

QUEL EST LA SOLUTION POUR DESACTIVER L'ERREUR CODE M4 ?

my copier is minolta di 181 it shows c1300 .how can i repair this problme? thank you.

C1301 errors after setting up the Di181.
Solution:
Replace PWB-A, part number 1177-0106-03 for C1301.

THIS ERROR IS CAUSED BY POLIGON MOTOR OF THE LASER SISTEM. IF YOU CAN GET TO IT, JUST OPEN IT , LUBRICATE DE SHAFT AND YOUR PROBLEM WILL BE SOLVED. GOOD LUCK.