My machine keeps prompting to "fill water tank", eventhough the water tank IS completely full. I know that you have to remove the tank and replace it, but it still says "fill water tank" .... The machine will not let coffe be brewed and sometimes I have to repeatedly remove and replace the tank until it says "ready" Then it will only brew ONE cup and it says "fill water tank" AGAIN! Can this be fixed?
Hi,
Make sure the magnet in the water tank flow up when you fill it with water.
Best regards
/Mirran
The magnet float may become stuck or may not move freely in its chamber. Clean the chamber and the magnet float gently with warm water and dishwashing liquid, moving the float up and down the chamber. Ensure you rinse thoroughly following procedure. Fill water tank again with cold water and replace into machine.
Insert steam spout and push OK.
Fill your tank and add descale solution.
Go to program settings - Descale.
Follow the prompts on the readout.
After descale and rise are complete refill your water tank.
Your system should now work as normal.
Note: If you do not have a descale solution, run the above with just water. Remember to descale when you obtain a descale solution.
3,730 views
Usually answered in minutes!
Coffe grinding but no water getting through
This is happening to me the float is working as it should but still the red fill tank lights is flashing any other ideas?
×