Hi ! i lose wire with 6wires connector. I try to find diagrams of pin out, but impossible, if someone of you can tell me wich wire is connected where in the connector of the Sub amp. Thanks a lot !
(There are different versions of the ba-200, so I'm assuming they al use the same wiring/pinout...) if you look at the amp on the enclosure(right-side up... so the writin goes left->right): The top left pin is #1, beside it is #2, then #3. The bottom left pin is #4, beside it is #5, then #6. #1 Right speaker positive input #2 Empty #3 12 Volt Constant Power #4 Left speaker positive input #5 Remote turn on / Acc power input #6 Ground Now there's supposed to be a 15-amp fuse on pin #3 (12v constan power).
1,753 views
Usually answered in minutes!
hello all , i have the same problem with this subwoofer but i cant imagine the pin scheme with this discription
( look for enclosure , the up side down etc )
my friend inferno77
can you post a scheme the way we must look the 6 pin plz ?
×