I have a picture when I turn on the tv but after 5 mins the screen goes black. If I turn the tv off and wait about 1 min and turn it back on, I have a picture again but then the screen goes black after 5 mins. Still have sound.
Also check the power cord wire coming from the back of the tv is loose from the tv side or perfect.
if the wires are proper then definately the problem of power transistor on the main motherboard.
you can get the power transistor at.
www.radioshack.com
if u have technical knowledge you can order the part and replace.or call the technician to do it for you.
it will be bit costly so do it carefully if try to do yourself.
goodluck
thanks,
if you go into your channel map (the area in your setup menu where you can add
or delete channels from appearing when you channel surf) the tv does NOT save
your channel map settings once you turn your tv off. this can become EXTREMELY
annoying if you have channels you don't want to surf through or have analog
channels that don't come in well. i have to go to this menu every time i turn on
the tv before i start watching, and delete all the channels i don't want to see
before i start channel surfing. and then once i turn the tv off and turn it back
on, you have to repeat the process again. it is sad that i have gotten extremely
quick at doing this since it is not something you should have to deal with on a
daily basis
2. another function that does
not save your settings on the tv is the delta volume setting in the sounds menu.
if you have channels that are at different volumes, this setting is supposed to
allow you t oadjust each channel's volume seperately so that when you surf, you
don't come across one channel that is whisper quiet while the next channel is
extremely loud. this is extremly apparent when switching between inputs, and
also between analog channels and digital channels. the most annoying part about
it not saving this feature is that once you set the delta volume and change the
channel, the setting GETS RESET TO ZERO! it renders this feature useless if it
does not save right when you change a channel. what is the point of this feature
then? why not just use the regular volume control?
3. once in a while, the tv will stop working. i have had it for
3 months, and sometimes i change the channel and all of a sudden the tv screen
goes black. it seems to freeze up. you can't turn it off, change the channel or
anything like that. you can't even turn it off by pressing the power button on
the actual tv, you have to unplug the power chord, and then plug it back in and
turn the tv back on and then it functions normally again
Number 3 sounds like the same problem that I have
×
Its the problem in the power supply board of your tv.
4,769 views
Usually answered in minutes!
tv screen goes off while watching
Black Screen and white light no picture or sound
tv turns on and shows picture for about 2 minutes or so then screen goes black if i turn tv off and back on picture does the same thing
the power supply seems to be putting out the correct volts to plugs
×