- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
on the back has a number on the bach in a box. use that number to casio website, maunal archives, use that number. has manual.. hold the top left button when hr blink press again, min, then goes to date use the left side to go up and down the numbers,when you get right number press top left.
mcdevito75 here, The mode button should be pressed, note dial blinking, now press set and that particular setting will cahnge, now adjust for the correct time.
mcdevito 75 here, You should press the MODE button then, see the display blinking, press set for each function after each function is set press MODE to move onto next function, Hour, Minute etc. Once all set press MODE to stop the blinking and restore normal steady dial.
mcdevioto75 here, I'll try to help, 1 of the buttons should say mode, if no button look for a in-dent naer the other buttons and push that in, or press the mode button and see the dial blinking, press set to cahnge and adjust each function, Hour, Minute etc. after each function is set press mode to mave to the next function when done with your functions, press mode to return to a staedy dial.
Keep pressing 'select mode' button until you get to H-SET. Than hold 'adjust' button until screen starts to blink. Now you can adjust analog clock by pressing 'start/stop (search)' button. When you are finished, just press 'adjust' button once. That's all.
Replaced with new battery if ever the battery 100% new .Then the problem is in the enternal connection is loose connection in the dial that's why intermittent problem.If you have knowledge to repair you can open this and resolder the loose connection,If you dont have the knowledge its better you bring your watch to a service center so it will repair properly and avoid the damaged.
×