Clark forklift horn wont work

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem. Clark GCS GPS Standard Forklift Factory Service Repair Workshop Manual...

Call Linde service group.

Hi,
I have clark forklift not starting
error: canbus error 1

Good morning.... sorry I have a Toyota forklift 5fbe15, which has problems with the left engine, since that does not work correctly...
If both are connected do not respond correctly...
I did not mark code can help me I have no manual... or diagrams

sounds like the #1 rectifier is shorted or the insulator gasket is shorted through -also the 1A contactor may be welded shut -usually caused by a weak battery or running a discharged battery too long. -Troy from A-Lift Services

SAE 90, or Transmission Oil should do the trick

It means it's time for your periodic maintenance, the reset button should be close to hour meter

it has bypass in the cylinders you need to rebuild it[put new seals in it].

check the amount of hydrlic fluid in resivor, sounds like you are low. if it is full your bleed back valve is sticking open

I got the same problem and same model, what's going on with Clark forklift, I look for the new transmission all over internet but can't find any. if any body know what wrong please tell us what to do. thanks a lot. TMV