For the
care of its machine it tries to use to toner of good quality if he is possible
original. Toner of low quality produces infinity of problems in its machine. One
of them is that it damages the laser unit. Faults in the feeding of paper, among
others.
The laser can be clean but, It must do
it somebody specialized.
1st laser synchronization error. It is an expensive part to replace and in most cases its cheaper to by a used Ricoh. There are some 1035s and 2035s out there that run around $700 in American dollars. If you can find them.
It's possible there could be something going on with the power supply.
The toner spill can vacuumed as well as the optics and the rest of the machine can be cleaned simply with cleaner.
SC322 - 1st laser synchronization error - • The 1st laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
Poss causes:
811 views
Usually answered in minutes!
×