Application Error while working on 3dsmax 2009 64 bit ,this error is coming very frequently and the program closes. originally the file was created on a 32 bit Windows and 32 bit 3dsmax 2009. Is there any problem in compatibility?

Try closing QB and restart the application. If that fails to fix issue try uninstalling/reinstalling the web connector.

Hi . Check the firewall options

Hi,
Welcome to Fixya. The problem that you have occurs because the program or application that you are trying to install is not compatible with windows vista. The game was released before the release of windows vista or even xp that's why it is not working. You can check the maker of the game and see if they release the patch for the windows vista version if not then there's no way you can play it on your system.
Thanks

what is the application?

It sounds like you are trying to run a Win 16 (Windows 3.x) program

This issue can be caused by any of the below possibilities.

1. File is corrupt, bad, or missing.
2. File is not designed for your version of Windows.
3. File is a virus, worm, or other malware file.
4. Hardware incompatibility.

Answer: File is corrupt, bad, or missing
If the file or program you're attempting to run is corrupt or missing, Windows will be unable to execute the file properly and sometimes generate this error message.
Download files
If you downloaded this file and verified it is complete and compatible with your version of Windows, delete the file and try downloading and running it again. It's possible during the download that the file became corrupted.
Finally, if the second download does not work, try downloading the file from a different webpage. It is possible that the person or company maintaining the website mistakenly uploaded a corrupt version of the file you're attempting download.
Installing a program from a CD or other disk
If you're attempting to install a program and are getting this error, verify that the CD is clean. If the CD is dirty or bad, you could get this error during the install and/or get this error after the program has been installed because it was not copied properly onto the computer.

• Additional information about cleaning a CD can be found on our cleaning page.

Running a program from the computer
If you're running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer you may get this error.
If the hard disk drive is corrupted or bad it can also cause working programs to fail either because not all the data can be read from the hard disk drive or because the program has become corrupted while on the drive. Run scandisk and defrag on the hard disk drive to check for any potential errors.
Long file name issue
Make sure the program or file you're attempting to run does not contain the same name as the long file name directory it is contained in. For example, executing a file named "program" in the "program files" directory can cause errors in some versions of Windows.
Additionally, if you're attempting to install a program and after the install the program does not work, you may also want to try installing the program in a different directory.
Bad file
Any file can be changed or renamed to be a .exe file. If you're downloading the file, make sure the file is supposed to be a .exe file and that it's not being changed. If you're attempting to create a .exe, file make sure you're compiling the file for Windows and never just rename a file to a .exe file. For example, renaming a .bat file to a .exe file will not make the file an executable file. For a file to become an executable file it needs to either be compiled or converted through a software program designed to convert the file.
File is not designed for your version of Windows
If you're trying to run a program that is not designed for your version of Windows you may get this error. Although many older programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will work.

• If the program is an older MS-DOS program or early Windows program you may get this error.
  
• If the program is designed for a 64-bit version of Windows and you're running it in a 32-bit version of Windows, it will not work and generate this error.
  

Try this.
Right Click on your DOS program EXE file. Then go to properties and go to Compatibilty TAB. Click in Check Box for Compatibitlity mode and select WINDOWS 95.

What OS are you using? Ultimate, Premium, Basic?
Windows DVD Maker has stopped working Issue : While trying to create DVD in Windows DVD Maker in Vista, or while creating a DVD from Windows Movie Maker, which uses Windows DVD Maker, the burn process stops with error message.

Error message : " Windows DVD Maker has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. "

Cause : Windows DVD maker stops working because of incompatibility with one or more codec files which are outdated or incompatible with the particular project or the DVD Maker software itself.


Resolution :

These Codec files should be located and renamed to resolve the issue.

1. Open Start menu and type Event Viewer in the Start menu search bar. Open Event Viewer from the menu.

2. In the Event Viewer window Click on Windows Logs in the left panel

3. Click on Application Logs under Windows Logs

4. Locate error messages listed in the Central panel of the Event Viewer window and double click the error to check if this is log is related to DVD Maker.

Sample Error Log :

Problem signature

Problem Event Name: APPCRASH
Application Name: DVDMaker.exe
Application Version: 6.0.6000.16386
Application Timestamp: 4549b5b0
Fault Module Name: nevideohd.ax
Fault Module Version: 4.6.15.0
Fault Module Timestamp: 459bb828
Exception Code: c0000005
Exception Offset: 00008b89
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1062


5. Locate Fault Module name, it should be a file with extension .ax.

6. Once the file name is identified, try to locate the file in C:/Windows/System32 folder. ( Please click on Show Contents if the files are not listed Automatically ).

7. If the files are not listed in System32 folder, search for the file, with search containing system files and folders.

8. Locate the file and rename it.

9. Check if the issue persists. If the issue persists and the error message again appears, locate the new .ax file that is causing the issue from the Event Viewer, error log.

These steps will resolve the issue instantly without a restart.

Check the file that you are trying to send. It's either in the file or application that you are using to creat the file.

if u have purchased a 3dsmax original dvd, then enter the serial number(400-12345678) and on the next page which opens,type the activation code provided on the dvd. OR if you have downloaded it,just open 3dsmax after installing.it asks u for activation of product.click next.enter serial number(400-12345678) and then copy the REQUEST CODE that appears on the next page(ctrl+c). then open the KEYGEN folder located in the 3dsmax setup folder and paste the REQUEST CODE.press CALCULATE. then copy this activation code and paste it in the activation code page.click NEXT,enjoy.