Kenwood DVD player 5 speaker system

Hi,

if this product instructions are not useful to help you install your device in the car and get the sound playing properly, I would recommend using a mobile mechanic to hook up the device and debug it for you as this will save you much time. But you can re-attempt the install based on the instructions once more as you might have accidentally skipped a step.

Thank you.

An FM transmitter is a portable device, which converts a specific audio output into an FM radio signal. It can be plugged into a CD player, satellite radio system, headphone jack, or a portable media player. One common use of an FM transmitter is to play music from an Mp3 player through the speakers of a car.

All DVD players use a twin laser pickup. One wavelength is for CD/VCD and the other is for DVD.The one that is used more often tends to fail first. Typical life span is about 750 to 1000 hours. If you have crossed this limit the Bose must be due for a replacement. Even if you have not crossed this limit the laser could have failed . They are unpredictable at times.

There are really only 2 options.

#1 Buy a fm modulated CD changer. This will allow you to play CD's over a FM frequency, and will use your factory radio as the output.

#2 Again you can buy a stand alone FM modulator with RCA inputs, and use an aftermarket CD/DVD player as a source.

Try to purchase a CD disc cleaner, sometimes the "eye" gets partials of dirt on the lens. If that's the problem the cleaner will fix it in no time.

Connect the supplied short RCA "Y" adapter cable to the mini jack of the transmitter base unit. Connect the "Y" adapter plugs to the TAPE 2 "REC" L and R jacks. These jacks will supply "line out" levels of any source selected at the Kenwood to the EWOS1 internal amplifier. The line out levels are "fixed" so changing the volume levels of the Kenwood will NOT change the volume out of the EWOS1 speakers. The EWOS1 volume will be controlled by the volume up / down buttons on the front of each speaker, or by the incuded remote when directed at the speaker(s).

The signals from the TAPE 2 jacks are ALWAYS on regardless of the source selected, so the Kenwood volume can be turned to minium and still provide an unchanged sound level from the EWOS1 speakers. Likewise, if listening to FM, Phono, CD, etc. in the room that the Kenwood's speakers are located, the OWS1 speakers will by playing the same FM, Phono, CD, etc program - unless they have been powered off. The point is, that unlike having to choose FM, CD, etc to listen to those soreces, you should never select TAPE 2 as a source. If TAPE 2 is selected, the KENWOOD would attempt to amplify TAPE 2's "PLAY" jacks, which I assume are not being used.

its happaning because of bad optical lence.
please replace it.

nuwan.

sory I did not see that this system will play external vieod, it looks like soumd only not video.
her is a list of specs you ca see for your self.
hope this helps you.


DESCRIPTION
N-CITY DVD-393 In-Dash Car
DVD/VCD/CD/CDRW/MP3/WMA/MP4 Player with Digital
Slot for USB/MMC/SD Memory playback
The New DVD 300 series from N-CITY comes with
everything you expect
Fully featured with Digital Media Slot for
USB/MMC/SD Memory
DIVX Playback, Sub-Woofer output & smart resume function
�@
��. Support USB & MMC/SD Memory Card for direct playback
��.Big size Dot matrix Display
��.DVD/DVD-R+/DIVX/VCD/MP3/ WMA/MP4/CD-RW Compatible
��.Fold Down Detacheble Front Panel
��.MP3 Selection by Sequence Number & Track Name, ID Display
��.Encoder Volume Control
��.Super Electronic Anti-Shock
��.Preset EQ (Flat/Pop/Rock/Classic)
��.AM/FM/MPX PLL Tuning Stereo Receiver
��.30 Memories System (FM18/AM12)
��.Auto Memory Store
��.Repeat/Program/Random/Intro Play
��.Electronic Audio Control
��.8-Times Oversampling
��.Mute / Loud Control / Clock
��.Auto Loading and Ejecting
��. 1- Bit D/A Converter
��. RCA Preamp Output
��. Subwoofer Output
��.ISO Mouting Chasis
��. 4 Channels Output (2V Preout)
��.60W X 4 Power Output
��.Full Function Remote Control

You may have Power antenna and amp remote turn on wires switched. Your system may be looking for turn on signal from radio and only gets it when am or fm is on because power antenna wire is hooked up instead of amp turn on signal.

i think u hv chip which is not playing pirated cds,,,,just modify the chip inside & enjoy