Canon 5185 error code NG #853 - Canon imageRunner C3100 Copier

problem with optical system.First mirror stand fails to move. May be sensor,motor or DC controller

Fixing belt home position detection error.
Replace Home Position sensor - 0,001%
Replace the Fixing unit - 105,9%
:)

Hi!
Tutulungan ka namin maayos ang sira ng phone mo.
Paki explain kung anung klase ng sira, pyesa ba o merong error code na lumalabas sa display.
Para mabilis ka namin matulungan

Add ka lang ng comment dito.
Salamat.

Hi,
first try to download new driver from http://software.canon-europe.com/,

then install everything from begining.

Did you try with PS drivers?Are anybodie else have this problems?Check the driver versions on other users and properties.

On official canon software download page you willl find win7 patch and drivers.

you must change the port of the printer,to usb port and not for network port.

http://www.usa.canon.com/opd/controller?act=OPDDisclaimerAct&fcategoryid=2281&modelid=12301&id=57901&file=/cpr/software/imagerunner/PCL5e-c_v8.55_Win2k-Vista_INF.exe
Try this for Vista 32 bit operating system printer driver.

NG 070 = Issue: ERROR LCD: CLEAR ADF, DOCUMENT TOO LONG
Solution: Reduce the length of the document

Reduce the length of the document to within 14" (356 mm).

I had a similar problem with my MF6540. I could access the remote UI and see that the printer was recieving information via the print log. It would list all of my test pages that I tried to print but in the print results column I would get an error code NG(##5536) and the printer would not actually print anything. I tried the UFRII driver stated above and everything seems to be working now.