I bought new Apple AirPort Express Base Station with 802.11. It was pretty easy to configure as per manual provided and with only one Ethernet Port. Utility Disk was pretty handy. As per the manual if you configured as it's says - you will see the green light on router and message will be shown that you have configured successfully. Till here everything was smooth like butter. Worst part started here - I have only Local access when i finish with setup configuration. i tried removing tcp/ip - iv6 protocol. Tried keep running only with 4. I tried with static IP. I reset the router again and the configured. It was still not working - Local access only. OOOFfffffffffff - Please no more problem. I tried on other system Sony - running with Windows 7. There was no change. Any suggestion please.
317 views
Usually answered in minutes!
Thank You Miguel. I tried few tips given on the different forums but unable to connect with Internet. Finally i returned the router as shop was near by and they returned their equipment within 10 days.
×