I need ricoh aficio mp 1600le driver, how do i get into.

SC500 is the main motor lock up error. Sounds like the developer has leaked out onto the drive gears and seized the developer unit. Will need replacing or stripping and cleaning.

Hello there.
BEFORE you start, you must find out the Windows operating system you are running on your PC. To do this, go to 'Control Panel' then 'System'. The system page will tell you what version of windows you have. Make a note of the version !!!!


The drivers for your Aficio machine are available to download from this page http://support.ricoh.com/bb/html/dr_ut_e/rcn/model/mp16/mp16en.htm

You just click on the Windows system that you are using, and you will then be able to download the drivers for the 1600le. You will probably need ALL the four different printer drivers.

To install the drivers, you will need to run each downloaded file and store the files extracted driver files in a NEW folder.

You then go to control panel - system - device manager - right click on your printer and update the drivers.

It is complicated but as with all computer items, it makes sense when you do it.

All you are doing is telling your specific PC, HOW to 'drive' the printer. Just like if you got in to a new Truck, you would want to have the driving instructions.

Good Luck

push the red button and see what it says to do

Go to www.ricoh-support.com and you will find that to download for free.
See you!

You can download for free the scan twain on www.ricoh.com.
Or you can add users and creat paths to do scan-to-folder (i think it is easier and work better)
If you do not know how to do it reply to me or post a new question.
See you!

this should be the manual(s) you require http://www.ricoh-usa.com/downloads/popup/popup_manuals_drivers_download.aspx?path=http%3a%2f%2fsupport.ricoh.com%2fbb_v1oi%2fhtml%2foi%2frc2%2fmodel%2fmp15%2fmp15en.htm

scanner driver can only be installed if you have the network option fitted in the printer. the scanner doesnot work through usb.

The 1027 uses a TWAIN driver for scanning, and you can get a TWAIN driver here:

http://www.opendrivers.com/driver/283630/ricoh-aficio-mp-2500-network-twain-driver-4.25.01-windows-2000-xp-2003-2008-vista-free-download.html

use an updated driver version for this machine on ricoh-support.com, another solution is using pcl5 driver as this one does spooling at computer and not machine...