At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
It sounds like I have the same problem. The TV turns on for a few seconds (with the timer light), then shuts off. Can someone tell me what part I need?
Nicole It sounds like I have the same problem. The TV turns on for a few seconds (with the timer light), then shuts off. Can someone tell me what part I need?
Nicole
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
code stands for loss of vertical. I had one of these if you can check pico fuses, check the ones on the main power board the one with the 2 convergence amps if any of them are blown then most likely the convergence amps have shorted out.
Over 95% of the time a 2 - 2 blink code on that model is a convergence output problem. You need to replace both of the convergence output IC's and perhaps the pico fuses feeding them voltage. The pico fuses are F9A04 and F9A05. They are on the same board with the convergence outputs.
No, that'll do it. Once you've changed em you'll know right away if somethin isn't right. But take faith and fire that puppy up. If the pix is good you did good. If something is amiss. I'd be happy to walk you through it. My money is on you though.
ok when the power is plugged in hold down the menu + device buttens for five sec what is the error code there should be two sets of numbers.... like 1 pause 2 let me know and i'll see what i can do!
If F9A04 and F9A05 are open the convergence ICs will need to be replaced as well as the two pico fuses. You will need two STK392-570 Convergence ICs and two 5 amp pico fuses. You ca get the replacement parts at the following link with free installation instructions. heres thelink. http://servicemanuals.vstore.ca/
Okay 2 blinks isnt a error code, so your set isnt shutting down due to a protection issue, so I would suspect one of the low voltage regulator transistors or the horizontal output transistor as being defective
You need the HV splitter. You can leave a email at the following link state your model number and let them know you need a HV splitter. They will respond quickly to your inquirery and they will provide free tech support to explain how to change the part. http://servicemanuals.vstore.ca/
It sounds like I have the same problem. The TV turns on for a few seconds (with the timer light), then shuts off. Can someone tell me what part I need?
Nicole
×