GE Caddx NX-1192E manual - GE Caddx NX-1192E - NetworX LCD 192-Zone Keypad

I don't think we will be able to locate a manual just for the keypad - is there a name or model # for the entire system? Like an NX-# or a Caddx designation?

Turn device counterclockwise to release from base.

Try 1234 or 9713

See https://caddx.izreview.com/interlogix-networx-caddx-alarm-manuals/

My caddx nx-8 system, have started going into a instant alarm mode for no reason, what can I check for this?

These alarm panels receive 16.5 VAC from a small wall adapter that is wired into the keybus and labeled 'AC'. Have a certified alarm company or installer check your system for faults and get things in order.

This could be referring to your battery backup for the control panel. Make sure your battery connections are secure and check the batteries' voltage with a multimeter. If it is showing less than 12 volts and has been connected to the control panel for more than 24 hours, the battery is bad and needs replacement. Contact your local alarm company and ask them verify the battery is bad, and they can install a new one for you right then.

There are a couple of things you can do, you can silence the keypad via a programming change to the alarm panel, but this requires knowing the installer or 'go' code. On the other hand, you can change the tone of the keypad by pressing * 0 and using the arrow keys to adjust the tone up and down.

Press * 2 and it should tell you what the problem is.

AlarmProfessor.net