1 TByte GoFlex

not sure if this is what you are after but have a look at this link..
96300 41001 135 simpleTech re drive 1 Tbyte hard drive power supply info...

Chirping on what?

Idler bearings are very common, they can also reduce the timing advance, reduce power in the engine

Here is the link to the pdf for your Go flex.
http://www.seagate.com/files/staticfiles/support/docs/goflex/goflex-net-user-guide-en-us.pdf

This is an excerpt from the file concerning NOT using the pogoplug...

Accessing GoFlex Net Without Using the Pogoplug Service (Windows)
You can access the drives connected to GoFlex Net without using the Pogoplug Web
interface. Follow these steps to set up local network access.
1. On the Windows taskbar, click Start > Network or right-click My Network Places >
Explore.
An Explorer window opens showing all computers on your network.
2. Locate and then double-click the computer name associated with GoFlex Net.
NOTE: Your GoFlex Net name starts with the letters "FADS" followed by the last six
alphanumeric characters of its MAC address. This 12 digit address, preceded by "MAC:",
is printed on the label on the bottom of GoFlex Net.
You can now access each drive connected to GoFlex Net. Access is regulated by the file
sharing permissions you set using the Pogoplug service.

Hope this helps...

The noise you can hear is not a good one, it is a seek error which means the drive is dead, there are companies who can recover the data but it is not cheap.

A chirping sound can indicate a significant problem with your Philips television. Chris Stein/Digital Vision/Getty images jQuery(document).ready(function(){ jQuery('.intro .thumbnail a:first').attr('href','http://i.ehow.com/images/a07/1e/dm/philips-turn-making-chirping-noise-800X800.jpg'); });

So your Philips television won't turn on and is making an annoying chirping noise in place of showing a picture. Televisions have become more and more complicated over the years, and harder to repair by non-experts. As with most electronics, there are a few simple fixes that might help. However, a chirping noise generally indicates a serious problem that might require a trained expert to repair your Philips television.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Easy Instructions Things You'll Need:

• Compressed air

1. Spray a few shots of compressed air into the vents of your television. Over the years, dust can build up and cause signal blockages or small surges within your system. Removing the dust can help clear out these problems.
   
2. Completely disconnect your television from all power sources as well as any components, and leave it this way for up to four hours. This will perform a "hard reset" on your television and, combined with the dust removal, might clear out any blockages that exist.
   
3. Call a trained technician to repair your television. The chirping sound indicates a problem with your power transformer and adapter. This will likely necessitate a new part for your television.
   

The noise and the light may or may not be related. The noise may be the wear indicator on the brake pads touching the rotor (they are supposed to do that when brakes are worn) The abs light triggers off a wheel on the axle end. If you have a bad joint on the axle, it could be noisy and causing the wheel to not have the proper clearance to the abs sensor. You really need to take the wheel and brake assembly off and carefully inspect everything. Make sure all abs sensor wires are undamaged...it doesn't have to be at the same wheel that's chirping.

If you can get to the dos screen try selecting repair and either let windows attempt a repair or restore back to the factory settings.

There's this website www.reliable-store.com
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, troubleshooting owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I
keep servicing and when needed repair it on my own. worth it !!!

If there is chirping noise then some object in the blower motor or the blower is making noise due the frictions b/w the walls of the blower motor unit ,you need to check the blower motor .....

Good luck...