At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
TUNER PROBLEM please advise me on what to do to my T-7J FM/AM/TV STEREO SYNTHESIZER TUNER (KENWOOD).i dont know how to make tuner work.there is a display but tuning, band, etc... seems like it is not working.it began when i use the sleep feature of its remote control.for not to worry on turning off the stereo, i used the sleep mode.but my problem, when i try to use its tuner again, i can not do so.i need your advise. tnx
I also find like your problem at the same modle. Please let me know how to tune this T-7J KENWOOD tuner.I also find like your problem at the same modle. Please let me know how to tune this T-7J KENWOOD tuner.
May someone help me with a step by step on how to program a Kenwood Fm/Am/Tv stereo synthesizer tuner T-7J.May someone help me with a step by step on how to program a Kenwood Fm/Am/Tv stereo synthesizer tuner T-7J.
This tuner work with a-7j amplifier with system control cable. Dont worry. Open tuner with screw driver. Inside has (test) jumper. Short it and relese. Now it will power on. But fm band end 90 Mhz. Enjoy. - wasanga ama..This tuner work with a-7j amplifier with system control cable. Dont worry. Open tuner with screw driver. Inside has (test) jumper. Short it and relese. Now it will power on. But fm band end 90 Mhz. Enjoy. - wasanga ama..
Probably you blocked dont worry unplugg it wait 2 mins and if your device has a reset switch just push it while you connect it. this most solve blocked devices....saludos
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Trisha, I beleive you use your autoscan feature, when it stops on a station you want to keep press and hold one of the preset buttons.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
That's a pretty standard setup. RCA cables from the KM207 to the preamp (KC207), and RCA cables from all of the other components into the KC207. Speakers connect into the KM207
It sounds you are using an amplifier and using the blue wire (power antenna remote turn on) instead of the blue/white wire (amplifier remote turn on). Try hooking up the blue/white wire to turn your amp on. When leaving tuner mode, the blue wire shuts off, turning off the amplifier.
There is nothing unique to the signal or speaker wires used with this component. ANY hi-fi or electronics shop, online, eBay will have whatever you need. Your choice. Hint: standard 16-gauge lamp cord makes excellent speaker wire. Don't spend a lot on copper cables.
I presume you realize none of these things produces speaker amplification. A receiver would do that and facilitate graceful and simultaneous interconnections. But it's not a necessity for selective interconnective between them, just not all at the same time.
I can't find any details on anything you named except the Tuner.
Typically, the tuner would use an RCA pair to go to a receiver AUX, TUNER or other Line Level input for source selection and amplification. Lacking a receiver, run it to the Tape Deck inputs for recording.
Ditto for the CD changer, but you'll probably have to disconnect the tuner.
I also find like your problem at the same modle. Please let me know how to tune this T-7J KENWOOD tuner.
Myy e- mail address is ukz 1620 @gmail.com.
May someone help me with a step by step on how to program a Kenwood Fm/Am/Tv stereo synthesizer tuner T-7J.
This tuner work with a-7j amplifier with system control cable. Dont worry. Open tuner with screw driver. Inside has (test) jumper. Short it and relese. Now it will power on. But fm band end 90 Mhz. Enjoy. - wasanga ama..
i already open the t-7j but i didnot find the jumper wher it is located?
×