My cf29 Panasonic toughbook have no boot file name/ pxe-e53

All Panasonic Toughbook Drivers can be
found at the following Website:

http://pc-dl.panasonic.co.jp/itn/drivers/d_menu_en.html

Click on your particular model (ie. CF29),
choose the version (MK1, etc.), choose the
operating system (ie. Windows XP),
then choose the driver (ie. LAN Driver) and
click on "Download Now".

Voila! That is how you find the Ethernet driver
for the Panasonic Toughbook CF29.

Good Luck!
Regards,
Richard - Montreal Based
Panasonic Canada Toughbook Dealer since 1989

First go to bios by press f10 (or kay for your model of laptop )and
select main menu and check display cd dvd drive and hard drive in information.

select cd dvd or hard drive to first boot .set network as lower than hard drive.

in this pic netework is high piority for boot up. but there are no network server to boot up. there was showed as no network device, pls select hard drive and select key for change setting.

re-installtion/recovery needs to operate normally again

External Speaker or Headphone Jack on the Panasonic Toughbook CF29 is located on the back side or rear of the CF29. There is a cover in the rear that has to first be opened. There is a sliding latch which has to be slid and held in rder to open the back cover.

Once the cover is open, then with the CF29 facing away from you as shown in the photo, the headphone jack is located on the left hand side. That is it!

Good Luck and Regards from:
Richard, Montreal Based Panasonic Canada Authorized Toughbook Dealer since 1989.

That means your computer trying to boot from LAN port. Go bios and change the settings of PXE boot to disable and make Hard disk as first boot device. Save the settings and restart your pc. It will work

I had a look on a few places that where selling recovery discs, i could only see cf29 discs, no cf30.
It may be worth giving it a go

The HDD must be installed with the OS it does not come preinstalled.

Your new HDD is blank.