Inexplicably, during a cycle, the washing started kicking and moving around. It had previously been balanced and nothing has changed. Now it looks like the drum inside is off kilter. Washer spins with nothing inside, but not with a load of clothes. Is it possible the drum got dislodged from it proper place after alot of rumbling around?How do I get it back in place? regards
We're very sorry to learn of your concerns regarding your Whirlpool® Washer. We would like to inquire further about your review with you. Please respond back to this email address [email protected] with your Reviewer ID, the name of the site you were contacted on (fixya.com), name, phone number, street address, zip code, model & serial number, and date of purchase on the appliance. Please include a brief description of your concerns in your email. Thank you.
SOURCE: drum off balance
Open washer's cover and look for a released or a malfunction shock absorber.
SOURCE: drum off balance
It's either a bad suspension spring or you have a crack in the tub support.
SOURCE: Roper washer ras7133kq1will not spin enough to wring out clothes
bad motor most likely. easy fix
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
SOURCE: washer sounds like off balance during spin
old duets have nut on rear pulley that becomes loose. remove rear panel and tighten nut. check while spinning by hand if pop is felt. if it rotates smoothly then you may need new shocks on tub
82 views
Usually answered in minutes!
the drum makes a big scraping sound when the spin cycle starts.
×