SOURCE: Dear Sir I have a CISCO
It looks like the IOS is bad or not not there.
You need to instal a new IOS onto the switch.
For more help during installation you can refer
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00800949c3.shtml#cat4k
SOURCE: Cisco IAD 2432-24FXS stuck in Rommon mode.
Is there a valid IOS image on the flash on the IAD? If it will only boot to ROMMON, also try issuing the "boot" command from the console prompt. If it then boots, you need to go into the configuration and set the boot election to auto-boot.
Sell Used Cisco Equipment
147 views
Usually answered in minutes!
×