Duo DVD 625 to HDMI - DISH Network DVR-625 DTV Receiver / 100-Hours Video Recorder

According to the serial number, the late 2012 Mac mini's maximum Resolution: Up to 2560 by 1600 (Thunderbolt) or 1920 by 1200 (HDMI). However, this mini does not have a slot loading DVD drive.

The last mini with a slot loading drive was made in 2010. That model's maximum resolution is Up to 2560 by 1600 (Mini DisplayPort) or 1920 by 1200 (HDMI)

It's that Dish receiver 625 have AV input ?

ashlinlow,

You can definitely use an RCA to HDMI converter, though since our 625 receivers do not have HD capability it won't improve the picture at all. If you would like to look into upgrading to HD equipment, you can reach me directly at [email protected]!

Tommy Faust
DISH Social Media Representative

Hi, I would be happy to help! Can you please send me more information on what the issue is? Thanks!

Cheri Torres Social Media Representative DISH L.L.C. [email protected]

Baba Ra,

We can definitely check this out! I hope it has been resolved by now. If it hasn't, please check the batteries and make sure they're good. If they are, try re-programming the remote. I have included the steps below for that!

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if it works.

If the problem continues, make sure there are no sources of interference like lights or heat near the receiver. If it continues after, then we will need to send a replacement remote. You can reach me here or at [email protected] for further assistance!

Tommy Faust
DISH Social Media Representative

i have a remote for a philips dvd 625 (dvd player doesn't work anymore)

[email protected]

Netherlands

granmabj,

There are common connections to each receiver but there are unique connections also depending on the receiver. Solo receivers have a coax cable coming from the Dish outside connected to Satellite In. Duo receivers and DVR HD receivers have the coax cable that comes from the dish outside that connects to Satellite 1 and Satellite 2 using a splitter. There is also a cable (coax, RCA (yellow, white, red) or component (green, blue, red - video, white, red - audio) or an HDMI if HD) connected from the receiver to the TV 1. For a duo receiver TV 2 may be backfed on the cable coming from the dish outside using diplexers. This may sound confusing but you can call 1-800-333-3474 for assistance.

Ray Calo
DISH Network

Absolutely, All HD Display that we have on the market have the HDMI (Hi Definition Multimedia Interface) connectivity. Please find this slot on your Wii and Dell XPS HD Display:

And use a HDMI cable to interconnect them:
You are now ready to go.

The 625 is not a high definition receiver and therefore does not support hdmi. You can use RGB or S-video to provide a higher quality picture than the coax output. If you need more options let me know. Thanks for using Fix Ya.