TO INSTALL PRINTER SOFTWARE

First download driver from below link. Click here Select os and download driver and install. Uninstall old driver then reinstall from new download. Let me know if you need further assistance. Thanks for using FixYa.

Make sure your Computer have wirelesscapabilities in order to connect to the HP wireless printer. This is how to doit. 1. Insert the CD that comes withthe wireless HP printer into any computer that will use the printer. This willallow to setup the initial software and allow you to configure the initialnetwork settings. 2. Choose where to install thesoftware and which components of the software to install. Typical componentsfor HP printers include the network utility and project creation software. Ifyou already have software for project creation, you don't need to install this.You won't need to install either component for other computers in order to usethe printer. 3. Turn on the HP printer whenprompted. Don't connect it to a computer unless directed by the software. Ifthe printer isn't recognized by the software, you may be asked to temporarilyconnect it via a provided USB cable. 4. Choose a printer name and an IPaddress. The IP address can be dynamic or you can create a static IP address.For larger networks, dedicate a static IP address or allow the HP software tochoose a static IP for you to prevent conflicts on your network. 5. Press "Continue" tocomplete the wireless HP printer installation. The entire process can take upto 30 minutes if you install all software components. 6. Install the printer on othercomputers by going to "Start -- Printers and Faxes -- Add a Printer."Choose "A Network Printer" to view a list of network printers. Choosethe printer name from Step 4 to install and access the wireless printer.

the shortcut is:
c:\program files\hp\digital imaging\bin\hpiscnapp

You can burn the software on a CD, you don't need the image. The old HP software and driver is likely causing the system to hang; remove all the HP software, remove the printer from the printer list, and then install the printer as a first time install.

It will install from a folder once you remove the old HP software

Resetting the HP All-in-One can sometimes resolve basic issues with the product's functionality, such as when there is no response from any one of these HP PSC products1400 series - 1401, 1402, 1403, 1406, 1408, 1410, 1410v, 1410xi, 1415, 14171500 series - 1503, 1504, 1508, 1510, 1510s, 1510v, 1510xi, 1513, 1513s, 1514. Reset the HP All-in-OneFollow the steps below to reset the All-in-One.

1. Turn off the HP All-in-One by pressing the Power or On/Resume button.
2. Unplug the power cord from the back of the HP All-in-One.
3. Plug the power cord back into the HP All-in-One.
4. Turn on the HP All-in-One by pressing the Power or On/Resume button.

Have you tried to download the driver form HP Support and install it?

And....are you using Vista?

Here is the support page for your printer.

PSC1402 Support

Download the correct driver for your operating system.

Uninstall (delete) the printer and start over. Make sure you disconnect the usb cable before you install the software. Don't plug it in until the software prompts you to.

I miss placed my Printer Software driver CD when shifting the house. I bought new computer and I want to install the printer into it can you please provide me with the driver
I AM NOT ABLE INSTALL HP DESKJET F 380 ALL-in-one Printer as i missed the driver CD
i want software

Visit:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=397785&lc=en&cc=us&dlc=en&lang=en&cc=us

Downlaod Software and Printer drivers.

Plz Rate Me.

Thanks.

Witch kind of printer do you have????