Lost my installation software for lexmark 1200.can i still install it

Try to fix the 1200 error first. The error indicates that the cartridge carrier has stalled. Please refer to this article to fix the problem: 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One. Once your cartridge carrier is functioning properl, re-insert your cartridges - How to Install Ink Cartridges In Lexmark X4200 Series AIO.

You can download the Lexmark X4270 driver by visiting the Lexmark website at http://bit.ly/gKXn7F. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

For your scanning concern, especially when scanning documents, you will need the Lexmark OCR scan software to do the job. The scan software is available only on the installation disc that came with your printer. If you lost the disc, please contact Lexmark Technical Support Center for additional assistance.

Yes you can download the software from the manufacturers website. Go to http://www.lexmark.com and look for downloads. Then enter your printer make and model to find your software. Download the software by following the instructions and install it on your computer before connecting your printer.

Good luck!

You can download driver from:www.lexmark.com
or you can give me your email address I can send you a driver lin then you can install it.

You can just download the printer software from this link so you can install it to your computer.

http://support.lexmark.com/index?page=answers&startover=y&question=Lexmark_Optra_E312&locale=EN&productCode=OPTRA_COLOR_1200&segment=DOWNLOAD&userlocale=EN_US#2

There are drivers available for download in the Lexmark website. Just click on this link: http://bit.ly/aiWCx4 . Type the exact model number of your printer just below the images of some of Lexmark's printers. On the next page, choose the operating system of your computer, if it's Microsoft or Macintosh, by clicking on the dropdowns found below the page. Choose the correct driver. Download and install. Hope this helps.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Hi there,

Here you can downoad the driver

DOWNLOAD Lexmark 1200 DRIVER

Kindly rate my solution here.

Good luck

Try this link. This will give you a download for the latest driver.

You can download the software for your printer from this link , just select the operating system that your computer is using http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:568:0:0

You can still get your software and drivers for you printer by using the finder on lexmarkswebsite found in the link below.

http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0