Change printhead in 5500

To change the printer head on the Kodak 5500 AIO printer, you will need to do the following:

To remove the old printer head,

1. Power on the printer.
2. Lift up the lid to expose the printer head.
3. Once the printer head moves to the middle, where you can get at it, then unplug the power cord to the printer.
4. Remove the ink cartridges.
5. With the printer head now empty, run your finder along the underside of the top of the printer head, all the way to the left side of the printer head.
6. Push up with your finger where there is some give, and the shroud that holds the printer head will release the head.

1. Simply put it in place, and push forward with your finger on the sticker that shows a finger pushing on a sticker, and you will hear and feel it click into place.
2. Reload your ink cartridges, close the lid, plug the printer back in and you're done.

Hello,

Here is the link to a .pdf document which has a clear graphical representation of how to change print heads:


http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf


Thank you.