N3260w no picture green led on

I have a 42in vizio led with about the same problem i replaced a 75 cent chip # u33 on computer board problem fixed.

Good day!!!!


That problem is usually cause of faulty capacitors on the power supply board..

Just follow this instruction to fix your TV..

1. Open the back cover of your TV.
2. Look at the power supply board..Its normally connected to the power cord..
3. After that,,try to look at the actual image of capacitors if it is bulged on the top so that you can easily determine the bad capacitors..
4. After that,,try to replaced the bad capacitors using soldering iron and soldering lead..replaced the capacitors only with the same type ratings and value..
5. Some of the capacitors not bulged so its better if have a capacitance meter

The tv T-CON board only board left could causes this problems.That the board usally sit at the middle at the botton of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-CON board for the replacement.

Ur LCD inverter board is dead.This board help to get the backlight to the LCD screen to make the Tuner board get the tv signal throught.Replaced this LCD inverter board will get ur picture back.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replacement.It a long board in shape.

I do not know the exact value but if you trace out the copper trace from the rectifier output, it should go to the first filter cap and then there will be an inductor and filter cap after that, you can figure out the voltage rating from there. You can get the parts here: http://www.shopjimmy.com/catalogsearch/result/?q=ViewSonic+N3260W
Look here about caps: http://en.wikipedia.org/wiki/Capacitor_plague

Pictures of the power supply will help. [email protected]

We got the part in today and the hubby fixed the tv. It is as good as new. We are very happy with our $62 purchase.

Go to http://store.ramplus.com/fsfspopfrpos.html

FSP228-3F01, FSP Open Frame Power Supply Replacement for Viewsonic N3260W - 32" LCD TV

It worked like a charm and took about 10 minutes to put in new part and put tv back together.

2000 year of introduced series. 728(2002) sold only in the UK.
is not new product by far. (in dog years it's. 100 years old)
IMO it belongs in a Museum.
hihi
put a new battery in it? (hope1)
this thing is old.
does it run with the battery out?
if not then the A.C adapator is bad (hope)
hope means , not bad INSIDE.

you have the V17+ chassis. The error code blinks a 2 digit code. So yours is either blinking a 12 for no error or a 21 for xray protect shutdown. Count the blinks carefull. it should blink a number pause then blink the second number. You will no doubt need the service manual. I have a good source for mitsubishi service manuals. Let me know if youd like more info and let me know what you discover with the blinking Led.

Hit the menu button does it work?