How do I turn off the Hourly chime on my Adidas 'Mens training duramo watch'
Http://www.amazon.com/Adidas-Duramo-ADP6010-Quartz-Digital/dp/B002SI11XC/ref=sr_1_fkmr1_3?ie=UTF8&qid=1340576121&sr=8-3-fkmr1&keywords=adidas+mens+duramo+watch+adp6000+great+watch+for+training
This exact watch.
I fell asleep on it and its been annoying me for about 3 weeks now.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It seems that most 4 button electronic watches have similar directions. There should be four buttons. Clockwise from top left is the Light button, followed by S2 (Stop), S1 (Reset) and finally on the lower left S3 (Mode). Who knows why they are numbered this way. To set hourly chime Hold down S1 and press S3. When all 7 day flags show the chime is on. When they are off the chime is off. To set the alarm hold down S1 and press S2. Alarm icon will display or go off. Release S1 button and display will return to normal time. Hope this works for your watch
Generally the chime is turned on or off by pressing a combination of two buttons. If you don't have the instructions that came with the watch, then perhaps you can figure it out with a little trial and error. On watches similar to yours, pressing two buttons at once changes functions such as 12/24 hour time, turning the alarm or chime on/off, switching the day/month in the date display (ie. 12-6 to 6-12), etc. You will just have to figure out which combination turns the chime on and off.
I've never used one of these watches, but after looking online, I think this is how it's done:
Try using the top-left button to cycle through the settings, and use the button on the right to change them. So I'd imagine that after pressing the top-left button enough times, the indicator for the hourly beep will start to blink. At that point, press the rightmost button.
The indicator on the face of the watch should light up to indicate that the hourly chime is enabled.
When you are setting alarm, look for the tiny speaker or volume sign on the so called dial. You must push appropriate buttons till that sign disappears. Then the beep will go off.
this is usually done by pressing two of the buttons together, I cant say which two, but you can try combinations. The watch should give a short beep when successful
×