Whirlpool LGV4634JQ Gas Dryer Logo

Related Topics:

A
Anonymous Posted on Jul 07, 2012

Kenmore 70 series dryer 110.74722400 wont stay hot

2 Related Answers

TheMobilian

Dan Webster

  • 8221 Answers
  • Posted on Dec 18, 2008

SOURCE: Kenmore 70 Series Dryer

The fuse probably blew due to a blockage of some sort. Check your ventpipe. It may be full of lint. The fuse is a small white part held onto the blower housing with 1 screw. It usually can be found under the dust cover on the rear of the dryer.84a81ce.jpg It has 2 small wires hooked to it and it is wired in series with the door switch. When the lint gets built up and dryer over heats and fuse blows. The result is just as if you opened the door.1d45fbe.jpg

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Ad

Anonymous

  • 1 Answer
  • Posted on Sep 27, 2009

SOURCE: My gas dryer stopped heating it is a Kenmore 70 series

My Sears Kenmore gas drier would not spin ? Any suggestions

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Wiring diagram for Kenmore 70 series dryer

There should be one inside console area
0helpful
1answer

Kenmore dryer 70 series

Check the vent for clogs and kinks. Could be something in the blower wheel causing the noise and blocking the vent.
Remove the vent from the back of the dryer, unplug the dryer, and reach inside the dryer vent to check for items lodged in the blower housing.
Feb 04, 2014 • Dryers
1helpful
1answer

I have a Kenmore Series 70 dryer wont start, just hums

Check for correct voltage at the terminal block on the back of the dryer, where the power cord attaches to the dryer.You should be getting 220/240 volts, check by way of a voltage tester.
If the voltage is correct, then could be the motor capacitor or the motor itself, or start button?
Good Luck !
2helpful
1answer
5helpful
1answer

Dryer wont start.

can you hear the motor or does the unit humm or vibrate when it is turned on
if yes then have a look at the belt
if not it's time sor a service call
0helpful
1answer

We have a Kenmore 70 series Electric dryer and it heats just fine and stays hot, air flow is good,(checked), however the clothes are not getting dry. My husband replaced the cord to the outlet from a 3...

Did the dryer get clothes dry in your old home with the 3 prong plug?

If so, id put the 3 prong plug back on it, and switch to outlet to a 3 prong...
1helpful
1answer

Doesn't move hot air to the outside

Clear obstruction to hose outlet.
Vitally
Jun 02, 2009 • Dryers
0helpful
1answer

Kenmore 70 series electric dryer. Clothes are

most common reason for this would be clogged vent...check all the way in and out!
Mar 16, 2009 • Dryers
0helpful
1answer

Kenmore dryer 70 series flame ignites, but goes out after 5 mins

If it's gas, the coil valves get weak and are unable to hold themselves open when hot. First, check the exhaust vent. If it's clogged, it can't remove heat and it will shut off prematurely. Most likely the coil valves though.
0helpful
1answer

Kenmore 70 Series Dryer heats for 5 minutes then trips breaker.

Thanks for the question Your problem is with your breaker its weak and wont hold you reset it it works againfor a while Happens a lot When this happens again touch the breaker you will feel its hot also check the connections at dryer and at box where you plug your dryerin see if the prongs of the cord are lost its copper color . thanks for the question the appliance docs
Not finding what you are looking for?

105 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Virgil Watts

Level 2 Expert

267 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...