My tv does not come on. I replaced one fuse. Nowq it blinks 10 times but wont come on. Help me!
On a Panasonic TV the 10-blink error code can sometimes be caused by low voltage running through an HDMI cable, particularly from a Media PC or some video game consoles. Try disconnecting any HDMI cables and unplugging the Television for 30 seconds, then power it on without the cables attached.
If this works, connect the cables to the front panel (usually HDMI-3) which uses a different controller board.
My TH-42PX60U power went out suddenly as well. I replaced the fuses (after removing the rear cover panel) and then saw the 10 blinking power light. Blinks 10 times, pauses, blinks 10 more times and so on. I replaced the power supply board, good price from River Valley Electronics, and that solved the problem. TV is back on line. I took a chance that this might solve the problem after seeing that advice from another post. Cheaper than buying a new TV.
Well the problem was solved with a simple kit i found online
there was a open 10ohm resistor and a shorted transistor. Q406- transistor and the R410 resistor take a dvm and test them on your psu. if you have decent soldering skills im sure you can repair your tv your self for well under $40.
What is the model number for power suppl bpard panasonic th-42px60u
When i turn my th-42px60u panasonic it has a black square screen in the middle of the screen leaving a 4 inch border with the picture visible... When i push the menu button it disappears and i could see the picture. If i push menu again it re-appears.. After 10 min the tv will shut down.. Then the led light will flash 11 times...
12,527 views
Usually answered in minutes!
same problem
I looked into what the problem could be and it points to 3 diferant boards. pa,dg,and h
i dont want to have to buy all three
can anyone shed some light on subject
The solution is to not buy Panasonic again or get the extended warrenty. My 10 blinks and pause Panajunket will sit bundled up while I watch my new Westinghouse 47" LCD. PJ is only 1-1/2 years old and used to watch DVD's only. Oh, and the rattling vibration when the sound turned up, not blasting sounds.
My husband was watching his TH-42px60U and it just went off, blowing a circuit with it. My husband fixed the circuit, but the TV won't come back on. The power indicator light blinks 10 times. My husband called Panasonic Support and was told that this is a service issue, and a TV service repairman will have to be called.
my pany does the ten blink code with no inputs plugged in no rca's, no hdmi's no component hd cables just a power plug. still blinks ten times
i have the same problem... it blew the 2 fuses. i put 2 new fuses in it and know it blinks 10 times with nothing hooked up. any ideas?
i popped 2 fuses and have the blinking 10 lights. anyonoe know what board to replace, the pa or h? anyone know where i can get them??
I had the same problem and it was a bad power supply board! If you can't afford to have it replaced I was asking to purchase your set. I just really needed the display panel but will purchase the whole thing if you so desire. Again, I had the same symptons and the problem was a bad power supply board.
Thanks for asking.
Nebster
power supply board? is that the same thing as the pa or h board that the service manual is telling me with 10 blinking lights?
i thought the power supply board is something different.
i have the same problem and i can't even find the fuses but looks like even after replacing the fuses the TV is still not coming on for people....let me know if someone has any luck with it
thanks
hey mmalignaagi
would you be willing to share your manual or tell me where you downloaded from
thanks
so far i replaceed the dg, h and pa and still havn't fixed it.. im going to try the p power next.. What do you guys think?
nebster,
I checked the resistance on the two white ceramic resisters and one doesn't have any resistance. It most be the power supply board. I will post my outcome soon.
Thanks for your help.
I have the same problem with the 10 light indicator. Which board should i look to replace?
Panasonic th42px600U. 10 blinks - my son checked so-blo fuses > OK, Checked power supply board no visable problems. Still 10 blinks? What's next PA or H Boards? Thanks for your time >> Rock
Is the power supply board the same thing has the pa or h board. the service manual is telling me blinking 10 times is either the pa or h board...
anyone fix there sets? I still have 10 blinking lights. I might try to buy the pa and h board. i have the service manual that costed me 12.00 that i downloaded. It says board pa or h is the problem. What do you guys think?
no picture on tv, light blinks 10 times, stops before restarting to blink again 10 times
×