Posted on Dec 11, 2008

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Dishwasher light flashes 7 times

My dishwasher stopped and then flashing 7 times. ichecked everything possible.no luck.pls advise.thanks.

2 Answers

Anonymous

Contributor 1 Answer
Posted on Apr 30, 2012

Anonymous

Contributor

Joined: Apr 30, 2012

Answers

Questions

Helped

504

Points

Hi... i had same problem with my dishwasher Model: ADP 4695/7 , it just started by flashing 7 times. Here is what i did...
1 - switch off machine on the ON/OFF switch
2 - press start program button and at the same time turn ON/OFF to ON but dont let go the start program button,whait till it flashes...
3 - after that just let go the start program button and just press it again
I believe the problem is solved now,it should go ok with the program, what u just did was to reset you mashine :D
Hope to be helpfull guys/ladys

From Portugal ACETUGA ... cumps

Ron Coons

Whirlpool Master 2,651 Answers
Posted on Dec 11, 2008

Ron Coons

Whirlpool Master

Joined: Feb 21, 2008

Answers

2651

Questions

Helped

1547345

Points

7824

Although i dont have a lookup for your particular model number. if you remove the lower access panel you will find techsheet/troubleshooter. in it there will be section on "clen light blinking 7x" foplloe direction to put into test mode to clear the fault. belive its,,, heated dry/ sani rinse / heated dry/sani rinse. pushing htese buttons is what gets into test mode

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

4helpful

1answer

I have a whirlpool adp6600 dishwasher. the green light just keeps flashing (i think it's 7 times in a row each sequence) and the cycle won't start. have tried turning it off at the wall, clean

Dishwasher is in fault mode hold start/pause button for a few seconds this will reset the unit run your cycle again if dishwasher faults again call you local service man.good luck

Read full answer

Aug 02, 2012 • Whirlpool Dishwashers

0helpful

8answers

Kitchenaid dishwasher (top of the line 2000 vintage) problem

WHAT IS WRONG WITH YOUR DISHWASHER

Read full answer

Aug 27, 2008 • Dishwashers

0helpful

1answer

Kenmore dishwasher, model 665.170 344 01. "Clean" light keeps flashing and will not stop. Have tried everything in the manual and the light still will not stop flashing.

Only reset you can do is unplugging power cord for 10 minutes.
The control panel it is probably faulty and in need for replacement.

Read full answer

Jul 19, 2008 • Kenmore 16602 / 16604 / 16609 Built-in...

1helpful

1answer

My Whirlpool GU2400XTP83 stopped during the wash cycle and there is a blinking light above the "light" cycle button. I can not reset the dishwasher, stop or start it.

Hello,

To reset the dishwasher push in this order the,

HIGH TEMP WASH- HEATED DRY- HIGH TEMP WASH- HEATED DRY - CANCEL/OFF

the control will be reset...but more importantly how many times ina row does the light flash..it will indicate what error code its displaying??

example if it flashes 4 times then a pause then flashes 4 times again its displaying the error code#4
7 flashes then pause then 7 flashes its displaying the error code#7 ect ect

GENE

Read full answer

Sep 05, 2011 • Whirlpool 24 in. GU3200XTP Built-in...

0helpful

1answer

DWF 415 Ikea Whirlpool Dishwasher has constant green blinking light. Drain pump works ok (as it will pump out a jug of water if I tip it into it!) but no water comes in. Cycle stops about 30 seconds after...

Anyone got an answer to this, as I have exactly the same fault.

Dishwasher appears to switch on OK, then after a short time (20 secs?) the pump noise stops and the green light flashes - it seems to e a sequence of 7 flashes, then stop... 7 flashed then stop.

The sequence could indicate a fault detected?

Anyone know anything about these units from IKEA, made by Whirlpool?

Thanks!

S

Read full answer

Feb 12, 2011 • Whirlpool GU2400XTP Built-in Dishwasher

41helpful

1answer

My dishwasher isn't working. The clean button

Hi

Thanks for using FixYa. If the clean light flashes 7 times, pauses, and then repeats this occurs when the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes 7 times, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

Please do rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Read full answer

Jul 12, 2010 • Whirlpool GU2400XTP Built-in Dishwasher

1helpful

1answer

Clean light flashing

Hi,

Sorry you are having trouble, I put together a quick check list and instructions on how to reset the control. Let me know if this works for you, if not I can dig a bit deeper to help.

http://www.fixya.com/support/r4628906-flashing_or_blinking_green_clean_light_7

Read full answer

Apr 25, 2010 • Kenmore 24 in. 16293 Built-in Dishwasher

0helpful

1answer

Hello.have whirlpool dishwasher 4404/5. green light flashes x 4

sorry...

This is the WRONG PLACE for paid advise...

You need to contact the CLOWNS who charged you...!!

FIXYA is entirely FREE... (all volunteer)...

Not ever to be confused with money grubbers...!!

Good luck with your scammers.

Carnac the Magnificent

Read full answer

Dec 03, 2017 • Whirlpool 24 in. ADP5962 Free-standing...

0helpful

1answer

Clean light flashing 7 times. Can't start the machine

The cleam light blinking means that the unit was not able to reach a proper heated wash cycle. Either your heating element failed orthe actual sump/pump motor system has failed. Check the element in the botton and see if it looks broken anywhere. If you can see a broken spot, you will k now that is the trouble.

Good Luck!

Read full answer

Oct 20, 2008 • KitchenAid 24 in. KUDS02FRSS Stainless...

14helpful

1answer

Kenmore dishwasher, model 665.170 344 01. "Clean" light keeps flashing and will not stop. Have tried everything in the manual and the light still will not stop flashing.

If the clean light flashes 7 times, pauses then repeats...

If the dishwasher doesn't sense a water temperature increase, it will stop working and lock the functions (clean light flashes 7 times, all buttons are non responsive).

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cyle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

If the issue returns, you could have a problem with the heating circuit (ie. element, thermostat or wiring). It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close it).

Read full answer

Jul 18, 2008 • Kenmore 16602 / 16604 / 16609 Built-in...

Not finding what you are looking for?

View Most Popular

24 in. ADP5962 Free-standing Dishwasher

Dishwashers

I have a whirlpool adp6600 dishwasher. the green light just keeps flashing (i think it's 7 times in a row each sequence) and the cycle won't start. have tried turning it off at the wall, clean

Whirlpool Dishwashers

514 views

Ask a Question

Usually answered in minutes!

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Whirlpool 24 in. ADP5962 Free-standing Dishwasher? Or just drag it here!

Related Topics:

Trustworthy Expert Solutions

Dishwasher light flashes 7 times

2 Answers

Anonymous

Ron Coons

Add Your Answer

Attachments: Added items

Related Questions:

I have a whirlpool adp6600 dishwasher. the green light just keeps flashing (i think it's 7 times in a row each sequence) and the cycle won't start. have tried turning it off at the wall, clean

Kitchenaid dishwasher (top of the line 2000 vintage) problem

Kenmore dishwasher, model 665.170 344 01. "Clean" light keeps flashing and will not stop. Have tried everything in the manual and the light still will not stop flashing.

My Whirlpool GU2400XTP83 stopped during the wash cycle and there is a blinking light above the "light" cycle button. I can not reset the dishwasher, stop or start it.

DWF 415 Ikea Whirlpool Dishwasher has constant green blinking light. Drain pump works ok (as it will pump out a jug of water if I tip it into it!) but no water comes in. Cycle stops about 30 seconds after...

My dishwasher isn't working. The clean button

Clean light flashing

Hello.have whirlpool dishwasher 4404/5. green light flashes x 4

Clean light flashing 7 times. Can't start the machine

Kenmore dishwasher, model 665.170 344 01. "Clean" light keeps flashing and will not stop. Have tried everything in the manual and the light still will not stop flashing.

Not finding what you are looking for?

24 in. ADP5962 Free-standing Dishwasher

I have a whirlpool adp6600 dishwasher. the green light just keeps flashing (i think it's 7 times in a row each sequence) and the cycle won't start. have tried turning it off at the wall, clean

Ask a Question

Top Whirlpool Dishwashers Experts

Mike Cairns

Cindy Wells

ZJ Limited

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Dishwasher light flashes 7 times

2 Answers

Anonymous

Ron Coons

Add Your Answer

Attachments: Added items

Related Questions:

I have a whirlpool adp6600 dishwasher. the green light just keeps flashing (i think it's 7 times in a row each sequence) and the cycle won't start. have tried turning it off at the wall, clean

Kitchenaid dishwasher (top of the line 2000 vintage) problem

Kenmore dishwasher, model 665.170 344 01. "Clean" light keeps flashing and will not stop. Have tried everything in the manual and the light still will not stop flashing.

My Whirlpool GU2400XTP83 stopped during the wash cycle and there is a blinking light above the "light" cycle button. I can not reset the dishwasher, stop or start it.

DWF 415 Ikea Whirlpool Dishwasher has constant green blinking light. Drain pump works ok (as it will pump out a jug of water if I tip it into it!) but no water comes in. Cycle stops about 30 seconds after...

My dishwasher isn't working. The clean button

Clean light flashing

Hello.have whirlpool dishwasher 4404/5. green light flashes x 4

Clean light flashing 7 times. Can't start the machine

Kenmore dishwasher, model 665.170 344 01. "Clean" light keeps flashing and will not stop. Have tried everything in the manual and the light still will not stop flashing.

Not finding what you are looking for?

24 in. ADP5962 Free-standing Dishwasher

I have a whirlpool adp6600 dishwasher. the green light just keeps flashing (i think it's 7 times in a row each sequence) and the cycle won't start. have tried turning it off at the wall, clean

Related Topics

Ask a Question

Popular Questions

Whirlpool dishwasher reset code

WHIRLPOOL DISHWASHER, ERROR CODE 4,

Whirlpool gold- quiet partner III

Whirlpool dishwasher F8 E1 error

Gritty white film all over dishwasher and dishes

Top Whirlpool Dishwashers Experts

Mike Cairns

Cindy Wells

ZJ Limited

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Manuals & User Guides