Error message f-01 on hotpoint ultima wt741 washing machine

It is possible the motor start capacitor has failed. Unless you know how to test it, call a service person.

F03 - Wash thermistor open/short circuit need a engineer out to fix it. hope this helps.

Error F05 indicates pressure switch jammed on full.
Remove lower rear cover of washer.
Locate and remove large black hose fastened to drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.
This should solve the problem.

• www.howtomendit.com/search.php?keywords...cat...
• www.howtomendit.com/answers.php?id=247026

Resolved the problem.
Switched off the power to the machine. hit the on /off button and the f-12 error code disappeared .
On reappling the power to the machine the orignial programme continued to completionj

Good morning.
Error code F03 means that the wash thermistor is open circuit, this means that the water is not getting hot.
You need to fit a new thermistor first of all, if that does not solve the prob, then you will have to fit a new heater element as well.
You will normally find the element and thermistor located at the rear of the m/c.
Access it by removing lower rear panel
To get the parts, go to-----www.hotpoint.co.uk
Plz rate my solution.
Thanks.

hi i have a hotpoint condenser tumbledryer with the eroor code f11 coming up its a hotpoint ultima ctd85 can anyone help pls

washing machine WT741 ultima all light are flashing and it won't do anything else

the manual can tell you the problem you can get this here


http://www.hotpointservice.co.uk/hs/pages/manual/manualSearch.do

if it wont drain check the pump for any blockages and working condition