At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
my gwl15 has the same problem it get to the rinse cycle and just stop with water not draining from tube an not going to spin cycle.my gwl15 has the same problem it get to the rinse cycle and just stop with water not draining from tube an not going to spin cycle.
AnonymousMar 19, 2014
i put some towels in which went out of balance however when I took them out and tried to spin water out it just keeps beeping. i also tried to do a new load and it will not worki put some towels in which went out of balance however when I took them out and tried to spin water out it just keeps beeping. i also tried to do a new load and it will not work
You can't post conmments that contain an email address.
Re: My fisher and paykel smartdrive 708 stops at...
With no error code ... I would check you drain pump or drain hose... you first may want to try a shop vac connected to the end of a drain hose .. let me know if it helps
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to check your lid switch & out of balance switch for
corrosion and replace if faulty.
Your out of balance switch is under the big yellow motor controller
OOB switch Is where the grey plate is on this picture.
Fisher & Paykel Smart Drive beeps and stops during rinse cycle. If I hit pause and wait and restart it eventually continues. It seems like it has problems detecting water level.
Take the lid off,just open it & pull it straight up.There should be a little red button that the lid strikes against unless its a different model,in that case it has a magnetic reed switch under the right hand side of the hob.press this red switch instead of closeing lid,see if it fill with no problem.the lid may not be making good contact with switch..if thats not it then it may be the inlet valve..then you can try the hot,if theres no problem with hot then its the cold valve.
Firstly, the model 708 is way more than 9 years old. More like 18 - 19 years old. There is 2 types of errors on a smartdrive. One is signalled by a single beep every second & the top row of lights will change. The 2nd is a rippling musical sound (like when you turn the power on at the wall) and some lights will be blinking. You need to tell us what sound it is and which lights are blinking or which of the top row lights are on (exactly, count from the right to left and which number is on & which is off) There is no such thing as a reset to do. Once I know the fault I can advise you what to do about it.
my gwl15 has the same problem it get to the rinse cycle and just stop with water not draining from tube an not going to spin cycle.
i put some towels in which went out of balance however when I took them out and tried to spin water out it just keeps beeping. i also tried to do a new load and it will not work
×