Question about Maytag Neptune MAH5500B Front Load Washer
Our dryer doesn't dry, where is the heating element located?
The heater is under the drum, remove the screws at the door hinge anda the screws on the other side of the door opening then remove the front panel.
Posted on Dec 20, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 05, 2012 | De Dietrich LZ9619 Front Load Washer /...
Sep 27, 2012 | LG DLE2532W Electric Dryer
First you have to determine whether you element is in the front or the back of the machine this is done easiest by looking at the front of the machine and seeingif its one complete piece or two. If its one, the element is in the back, if two its in the front. We'll start if its in the back first. Tools you'll need is: 1/4 nut driver or drill with 1/4 adapter and a multimeter with ability to check continuity. With the machine unplugged, remove the back cover of the dryer. Once done, the heating element will be located on the right hand side with two fuses on the housing of the element. Test the element and each fuse seperatly by removing the wires and checking for continuity on each component. All parts should show continuity, so if one doesn't its bad and needs to be replaced. Now if the element is the front everything is the same with the exception of you have to remove the lower portion, usually held on by 3-4 screws located underneath.
If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3
May 19, 2012 | Whirlpool Dryers
May 10, 2012 | Whirlpool Dryers
Apr 25, 2012 | Roper REX4634KQ Electric Dryer
Dec 31, 2011 | Maytag Dryers
Dec 21, 2011 | Zanussi TC7114W Electric Dryer
Nov 13, 2009 | Frigidaire FEX831CS Top Load Stacked...
Oct 26, 2009 | Kenmore Dryers
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: