I purchased a Magnavox TB110MW9 DTV converter box and hooked it up to my Magnavox 15MF400T/37 TV. It runs through the system setup fine, I get crystal clear picture, but no color and no sound.
I spoke with cust. service re: converter box and they informed me that the rf (?) might be bad. I tried another cable and got the same thing.
I hooked the converter box to another TV and it works fine. It's something with this particular TV. I'm sure it's a simple setting somewhere that I can't find. Please help!
SOURCE: Need Help
check the cable connecting to the System unit!, it could have loosen up!
tighten it
SOURCE: My magnavox 37mf321d 37 LCD tv
This is a bad power supply and an easy fix. Their are several electrolytic capacitors on the power supply. If one is bad it will have a bulge on the top. Mine had a bad 2200uF and a bad 1200uF capacitor. About $7 worth of parts at Radio Shack. Radio Shack had the 2200uF but it was axial leads instead of radial. (leads come out of each end instead of one end) but It will still fit. They only had a 1000uf capacitor so I combined that with a 220uF capacitor and wired them in parallel. Make sure you put them in with the correct polarity.
SOURCE: 32 in Magnavox tv model 32MF231D/37
An earlier post of the smaller model of this with the same problem said to remove the metal cover over the power supply.
I have the 26MF231D and it worked great afterward (even though you can't mount it)
Here is how you remove the cover.
http://www.flickr.com/photos/88002248@N00/sets/72157611665895426/
SOURCE: restricted channel
Go into your menu. In the menu you will find parental controls. Disable them.
SOURCE: Need Universal remote code for Magnavox 15MF400T/37
these are the codes associated with Radio Shack's line of remotes:
One for All Universal (Radio Shack)
0054, 0179, 0030, 0020, 0024, 0096, 0186, 0171
And I was also able to find these:
UNIVERSAL REMOTE CONTROL CODE LIST for TVs
MAGNAVOX
002 009 109 118 209 309 402 408 502 508 510 807 914 917
167 views
Usually answered in minutes!
×