I followed the instructions to install it, but when i try to open it, it says that it cant be found or is owned by another program. ive tried uninstalling and reinstalling but it didnt help. and i tried to download the software from the coby website but it didnt help.
how can i open the software?
In the search box under the program list that pops up when you press the windows icon in the LH of the task bar , type in coby dp and enter
if it is in the computer a list will come up
click on that and that gets you to the path
high light and click to open
SOURCE: I can no longer download the photos from my cybershot onto my pc
Tell us more about the Computer and how you are connecting the camera to the same
SOURCE: Installing the Photo Viewer Software
MAC is developing a miniCD adapter. But that doesn't really help you now. Probably your best bet is to connect it to your mac via USB since it has a port and just drag and drop onto the flash drive. Mac should read it as a file.
J. DeRuvo
Digital Camera HQ
SOURCE: can run photoviewer program for photo keychain
1. Connect the USB cable to your computer and Digital Photo Keychain. Press ^/down to
access the USB update mode on the Digital Photo Keychain and press the menu/power
button ( ). Your keychain will now say, “updating” and you are ready to open the software
on your computer. (Please note that the keychain will continue to say, “updating” the entire
time that you are working with the program on your computer and will change only when you
safely disconnect it from the computer.)
IMPORTANT: The keychain MUST be plugged in and in “update” mode in order for you to
open the Photo Viewer program. If it is not plugged in, or is in the wrong mode, you will get
the following error: No photo viewer is found, program terminated!
2. Once the keychain is plugged in and in “update” mode, double click the Photo Viewer
icon on your desktop to launch the application.
3. Use Photo Viewer’s file manager to browse photos on your computer.
SOURCE: Cant upload photos from my Sony DSC-S750
Digital cameras on windows seem to like getting a letter that is higher
than D but lower than H in the alphabet. I don't know why. But when
windows assigns out all the letters through H: it sometimes stops
mounting some devices properly.
TRY THIS
Uninstall the camera driver and software, un-hook the camera, and restart. Then boot the PC. Make sure that you do not currently have any drives using letters F or G. If you do, use disk manager in your control panel to change the CD/DVD drive letter to Y,X, or Z
Attach the camera to a different USB port than you usually use (Believe it or not that is critical) and then reinstall the driver and software. Give it a moment before attempting to access the device and make sure that it is assigned a drive letter.
Should work fine after that.
813 views
Usually answered in minutes!
×