Question about Mitsubishi WD-65833 65" HDTV

1 Answer

White vertical lines after changing dlp chip and lamp on Mitsubishi WD-65833. good picture in background.

Had white dot problem. Changed the dlp chip and the lamp. Now I get the picture clear of white dots but vertical white lines.

Posted by on

  • L D Scoggins Aug 26, 2012

    Reseated the dlp chip and everything works fine.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Had white dots on mine as well i changed the dlp chip and put it back together and got the white vertical lines i decided to check all connections and make sure the chip was locked in correctly
it was not locked in securely i reassembled and now problem solved picture looks brand new so always check connections before assuming its the dmd board

Posted on Feb 14, 2015

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: developing white dots

white Dots appearing on Mitsubishi DLP 1080p. What causes this?

Posted on Mar 20, 2010

Anonymous

  • 58 Answers

SOURCE: Mitsubishi WD-52525 52-inch DLP HDTV ywllow warning lamp light

that means your lamp it is getting to the end of its life.
sometimes even if the lamp still good the TV will send you that message because that timer is closed to 5000 hours

What you can do is open the lamp door, closed again and the tv will ask you if you replaced it the lamp, and just say yes and that sign will go away

or just simple replace the lamp. 915P020010

Posted on Apr 18, 2009

Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: mitsubishi wd 62527 has very dark picture changed

Clean the small front projection mirror. That mirror can get dust on it and will cause the projected image to appear dull and dim and cleaning that mirror will usually restore the brightness and crisp details in the image.

Posted on Oct 23, 2010

jandksurber

  • 1 Answer

SOURCE: I have a mitsubishi tv

dip chip

Posted on May 14, 2011

Kenneth Lee Sr.

  • 597 Answers

SOURCE: I have White and black

I developed white spots on the screen of my Mitsubishi WD-57734 in increasing numbers over days and weeks. I called a repair service who quoted me $1500 to replace the light engine. He suggested I call Mitsubishi Customer relations at 800-332-2119 option 5 which i did. To make a long story short after several conversations with them they agreed to replace the part for free if I picked up the labor (Would have been less conversations if I had the original purchase receipt). Instead of $1500 I paid $250. The tv was only 3.5 years old. Perseverance paid off.

Posted on Jun 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I diagonally adjust (clockwise/counterclockwise) my Mitsubishi DLP TV? The picture is off center


You need to align the optics mechanically. If you changed the dlp chip and its not centered then the chip is not shimmed properly or the reflection mirror behind the lens needs adjustment. You should get a service manual for that chassis and follow the directions. there may be an electronic method but I am not aware of one.

Sep 05, 2015 | Mitsubishi WD-60C9 60" DLP HDTV

1 Answer

Dlp chip after replacing


you will need to pull the chip out & clean out the dust & other foreign particles that were allowed to fall in & lightly brush off the chip (with a very soft brush, again to remove dust & foreign particles.

Apr 28, 2015 | Mitsubishi Tv Dlp Lamp 915p061010 For...

1 Answer

White lines that are constantly on will go away for a few seconds then pop back up.. Mitsubishi 73" model number WD-73640


You need to replace the 4719-001997 DLP Chip. this should solve the issue.
This chip can be expensive so look around before you purchase. This is a common problem with these TVs, both white lines and white dots. You can find out how to replace the chip by going to this website: http://www.fixyourdlp.com/2012/09/04/solve-the-mitsubishi-wd-73640-white-dot-problem-with-a-new-4719-001997-dlp-chip/.Hope this helps

Feb 27, 2013 | Televison & Video

1 Answer

How do I remove vertical lines from my Mitsubishi 65 inch DLP?


it is your dlp chip i just changed mine make sure it is in tight ther is a video on you tube that is very helpful mine did the same thing with the lines untill i got the dlp chip in tight

Jan 17, 2013 | Mitsubishi WD-65735 Television

2 Answers

After replacing the dlp chip in my mitsubishi tv there are vertical lines on the screen. any ideas?


i had the same lines on my 65' mitsubishi tv after replacing the DLP chip. after going back over everything i realized that the casinf that holds the chip in was not in the lock position. i took the chip out and replaced it then turned the little locking mechanism to the locked position. now my screen is perfect. hope this helps.

Nov 21, 2012 | Mitsubishi WD-60C9 60" DLP HDTV

2 Answers

White death DLP TV


White dots on your RPTV television are the result of the DLP chip being worn out. You can replace it very easily by buying a new DLP chip for just under $190 and installing the new chip. There is a very good forum over at fixyourDLP that offers tutorials for replacing the DLP.
http://www.fixyourdlp.com/2012/10/11/banish-white-dots-from-the-samsung-hl56a650c1-with-a-new-4719-001997-dlp-chip/
or for Mitsubishi
http://www.fixyourdlp.com/2012/10/02/install-a-new-4719-001997-dlp-chip-and-banish-white-dots-on-the-mitsubishi-wd-82737/

Jun 04, 2012 | Mitsubishi Televison & Video

1 Answer

I have a mitsubishi wd 65 837 and it has white and black spots on the left side of the tv , can it befixed ?


I just had this happen to my wd-65833. It is a faulty dlp chip (they call it dmd board). I called Mitsubishi and they covered the cost of the part but there is a $200 service fee for the technician, no they will not send it to you. Support Service Mitsubishi TV

Sep 06, 2011 | Mitsubishi WD-65833 65" HDTV

3 Answers

Just paid to replace the lamp 2 weeks ago in our mitsubishi 73 dlp 1080p tv purchased a 5 year in home contract with Tweeter Sevice net 1/2008 lamp fixed and picture is once again great but now the 73...


Mitsubishi that the one,who u should contact.Talk to them make some kind of deal with them to help u to do a repairing or replace the tv Light Engine Projection Block.That the tv problems,this problems a design flaw on the tv Light Projection Egine Block the IC they put in that causes of this white spots are showing up will continue showing up more and more white dots.It will not stops.

Sep 03, 2011 | Mitsubishi WD-73833 73" HDTV

Not finding what you are looking for?
Mitsubishi WD-65833 65" HDTV Logo

1,235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...