Intermittent audio problem

Check the solder connections on the preamp ic's. These tend to break down after a while.

the color wheel is faulty needs replacement the intermittent colors na fading is caused by the speed being not in sync with the dmd due to wear these and the fans are the only moving parts

that is a sign the battery needs changing

Intermittent activity is a sign that the clock is dying. This is a very common issue with Pathfinder clocks, unfortunately. They were manufactured pretty poorly. If you want to have it repaired with a lifetime guarantee, please check out www.autoclockrepair.com. All the info is there on how to remove the clock. Drop me a note if you have any questions, thanks!

had exactly the same problem myself, changed the balance, and the selector until Sugden suggested the relay. this did the job, and my amp is sorted. Shouldv'e changed this in the first place. Good as new. Shaun

check the connection to the motherboard it may be lose dissconnect it and reconnect it or you lcd converter may be going but try the conntection

Hello ryan_4run,

The "non-fading" output may be turned ON or the rear output may be set to R-SP:S/W or both.

Press AUDIO repeatedly until NOFAD:ON appears in the display. Press DOWN button to turn non-fading output OFF. Also make sure that the setting for the rear output is set to R-SP:FUL and not to R-SP:S/W.

Hope this helps.

Normal 0 See section A. Skyper in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

Hope this helps. Bud

please check if your wiring was correct or you don't have a bad wiring in there...

it can be something blown, or that the frequency is to high or low on the speakers, try changing the speakers.