Can't install a logitec quickcam E 2500 on my mac

The QuickCam Connect is a brand of Web camera manufactured by Logitech. It is among the lowest-priced in the Logitech line of cameras, and it was developed to work exclusively with the Windows operating system. As a result, the Logitech Web site does not offer software that allows users to connect the webcam to a Macintosh computer. However, third-party software is available at no charge to enable you to use a QuickCam Connect with your Mac.

Plug your QuickCam Connect into an available USB port on the Macintosh. Navigate to the Macam download site, which is hyperlinked on the site or is available below. http://sourceforge.net/projects/webcam-osx/files/macam/0.9.2/macam.0.9.2.dmg/download Note: When you arrive at this download site, the application will immediately begin downloading onto your Macintosh. After the software has downloaded to your computer, it will automatically decompress and a disk drive icon will appear on your desktop. A dialog window will open in the Finder. The Macam application is pictured within the dialog window, and should be highlighted, then dragged to your applications folder. From the "Applications" folder, double-click on the Macam icon and open the program. Navigate back to the Macam dialog window that opened on your desktop after the application was downloaded from the Internet. Highlight and drag the "macam.component" to the "/Library/QuickTime/" folder. Use a simple video viewer to verify that the component is installed correctly. QuickCam Connect and iChat IChat is a popular instant messaging application that comes with the Macintosh OS. The software download that allows you to use a QuickCam Connect with your Mac needs another piece of software to be compatible with iChat. Unfortunately, this compatibility is not free. Navitage to Ecamm Network (see Below) and locate iUSBCam, a software application that will make iChat compatible with QuickCam Connect. http://www.ecamm.com/mac/iusbcam/ IUSBCam costs $9.95 as of January 2010. After purchasing the software, download and follow the installation steps that accompany the application. Help with installation and applications. http://sourceforge.net/projects/webcam-osx/forums/forum/145156

There are now several versions of the basic Futura software and AutoPunch available on the market. The most current is version 1.0.0.2. To determine what version of either software you have, you will find this information around the inside rim of the CD at approximately 4 o'clock. Before loading any of the Options into your computer, check the version and then follow the steps below. The following steps will update your software so that you will now have the latest 1.0.0.2 version of the basic program and all options.

To load base software 1.0.0.0 with AutoPunch 1.0.0.0 or base software 1.0.0.1 with Autopunch 1.0.0.1

• You must use bobbin part number 085128. This bobbin is specifically designed for the Futura CE-100 and CE-200.
• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and turn off the machine
• Install Autopunch and leave the CD in the tray
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Turn on Futura machine and double left click on Futura icon to open program
• Type in the Access code from Autopunch jewel case and then left click on the check mark to open program
  

To load base software 1.0.0.0 with AutoPunch 1.0.0.1 or base software 1.0.0.1 with Autopunch 1.0.0.0

• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and turn off the machine
• Install Autopunch and leave the CD in the tray
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Turn on Futura machine and double left click on Futura icon to open program
• Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 or 1.0.0.1 with Autopunch 1.0.0.2

• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close software and turn off machine
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Install Autopunch using Installation Wizard - leave CD in tray
• Turn on Futura machine and double left click to open program
• Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.2 with Autopunch 1.0.0.0 or 1.0.0.1

• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and turn off machine
• Place Autopunch CD in tray but CANCEL Installation Wizard
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Turn on Futura Machine and double left click to open the program
• Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.1 with Autopunch 1.0.0.1 with Hyperfont 1.0.0.2 or Photo Stitch 1.0.0.2

• Load Base software (have the machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and then turn off the machine
• Install the Autopunch program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in the Access code from Autopunch jewel case and then left click on the check mark to open program*
• Close program and then turn off the machine
• Download appropriate update for Windows version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop icon to install update
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and then turn off the machine
• Install HyperFont program - leave CD in tray
• Turn on Futura machine and double left click to open program
• Type in Access Code from HyperFont jewel case and then left click on check mark to open program*
• Close program and then turn off the machine
• Install PhotoStitch program - leave CD in tray
• Turn on Futura machine and double left click to open program
• Type in Access Code from PhotoStitch jewel case and then left click on check mark to open program*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

To load base software 1.0.0.2 and adding all Options - Hyperfont 1.0.0.2, PhotoStitch 1.0.0.2, Autopunch 1.0.0.2 and Cross Stitch 1.0.0.1

• Install Base software (have machine set-up for embroidery with USB connected to both the machine and computer- machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and then turn off machine
• Install Autopunch program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from AutoPunch jewel case and then left click on check mark*
• Close program and turn off machine
• Install Hyperfont program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from HyperFont jewel case and then click on check mark*
• Close Program and turn off machine
• Install Photo Stitch program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from PhotoStitch jewel case and then left click on check mark*
• Close program and turn off machine.
• Install Auto Cross Stitch program and leave CD in tray
• Download appropriate update for Windows version from the Futura-Support.com updates (Fut_sp2_Options.exe) and save to desktop
• Double left click on the desktop download icon to install
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from Auto Cross Stitch jewel case and then left click on check mark*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

Good day Sir, That is common macintosh problem. There is described "driver not installed" at product List Window after you click Add and select USB. I suggest Reintall the software and make sure that you are using a high-quality cable.

Installing software Samsung scx-4200 for Macintosh
Verify the following before you install the software.
Operating System - Mac OS 10.3x or higher
RAM - 128 MB
Free Disk Space - 200MB

1. Make sure that you connect your printer to the computer. Turn on your computer and printer.
2. Insert the CD-ROM which came with your printer into the CD-ROM drive.
3. Double-click CD-ROM icon that appears on your Macintosh desktop.
4. Double-click the Mac_Installer folder.
5. Double-click the Mac_printer folder.
6. Double-click the Samsung SPL2 Installer icon.
7. Enter the password and click OK.
8. The Samsung SPL Installer window opens. Click Continue and then click Continue.
9. Select Easy Install and click Install.
10. After the installation is finished, click Quit.

Have a nice Day.

Driver download link: HP Deskjet 3745 Printer Driver

http://www.usa.canon.com/consumer/controller;topic=609.msg7369?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=104&modelid=6624#DownloadDetailAct




Mac OS X (Native Mode)

1. Turn the computer on. Log in as the first created administrator account to install the software. You cannot install the software when logged in using added administrator accounts.
   
2. Place the CanoScan Setup Utility CD-ROM in the drive.
   
3. Double-click the CD-ROM icon.
   
4. Double-click the MacOS X folder/icon.
   
5. Note: Some versions of the CanoScan Setup CD-ROM will not include the Mac OS X version of Toolbox. If this is the case, you should download and install Toolbox from Canon's website. www.canontechsupport.com
   If you will not be installing Toolbox at this time, skip to step 7.
   
   Double-click the CanoScan Toolbox folder/icon.
   
6. Double-click the CanoScan Toolbox Installer icon. Follow the on-screen prompts to complete the installation.
   
7. Once the installation of Toolbox is complete, you should then access the ScanGear CS folder also located in the MacOS X folder.
   
8. From the ScanGear CS folder, click the ScanGear CS Installer icon. The installer will search for available install locations for the scanner plug-in driver. Follow the on-screen message prompts to complete the installation.

Is there a way to get this web camera working on XP SP1? I just need drivers, no camera management software or anything. Best regards. M/N: V-UCV39 P/N: 860-000114 PID: LZ823BR

If you forget your PIN code, you can regain access to the CX6400 by running the security lock program from your computer:
1. Insert your Stylus CX6400 software CD-ROM.
2. Windows: If you see the Software Installation screen, click Exit.
Open the SecurityLock Tool folder on your CD-ROM, then double-click the program file located in that folder.

Macintosh: The EPSON folder automatically opens (if it doesn’t, double- click the EPSON CD-ROM icon). Then double-click the Security Lock icon.

Open windows explorer.(START-PROGRAMS-ACCESSORIES-WINDOWS EXPLORER)
click the +, by my computer, click once on the cd rom, find the setup or autorun file in the right hand pane and double click it and the cd should start.


srich

Error 2711
When receiving the 2711 error during Logitech QuickCam/Image Studio software installation, please perform the following steps:

1. Use Add/Remove programs in the Control Panel to uninstall any current installation of QuickCam/ImageStudio software. For Microsoft Windows 95, 98, ME or NT
   
   1. Click Start, Settings, then Control Panel.
   2. Double click the icon labeled Add/Remove Programs.
   3. Highlight the desired program in the list provided (QuickCam or ImageStudio).
   4. Click Add/Remove Programs located in the bottom right of the list provided.
   For Microsoft Windows 2000 or XP
   
   1. Click Start. followed by Control Panel.
   2. Double click the icon labeled Add/Remove Programs.
   3. Highlight the desired program in the list provided (QuickCam or ImageStudio).
   4. Click the button labeled Remove located in the bottom right of the program selected.
2. Navigate to C:\Program Files\Logitech.
   1. Double click the icon on the desktop labeled My Computer.
   2. Double click the icon labeled C:\(computer name).
   3. Double click the yellow folder labeled Program Files.
   4. Double click the yellow folder labeled Logitech.
3. Delete any folders for QuickCam/ImageStudio.
   1. Select the yellow folder with the QuickCam or ImageStudio names.
   2. Click the menu options for File, followed by Delete.
   3. Repeat for any other QuickCam/ImageStudio folders.
4. Delete all files located in the Windows temporary directory C:\Windows\Temp or C:\WinNT\Temp
   
   1. Double click the icon on the desktop labeled My Computer.
   2. Double click the icon labeled C:\(computer name).
   3. Double click the yellow folder labeled Windows or WinNT.
   4. Double click the yellow folder labeled Temp.
   5. On the menu across the top of the window, click Edit followed by Select All.
   6. On the menu across the top of the window, click File followed by Delete.
   7. Click OK.
5. Reinstall QuickCam/ImageStudio
   1. Remove and reinsert the QuickCam/ImageStudio CD and follow the prompts OR
   2. Double click on the downloaded ImagStudio file.

hi, you can download the software from this link
http://www.logitech.com/index.cfm/suppor...