Cleaning process stays on INTENSIVE

Hi Anonymous, this is AP!

I understand you are interested in the self-clean process for your Frigidaire slide in range, model FES355ASF. Start by removing all excess spillovers in the oven cavity before starting the self-cleaning cycle. To clean, use hot soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. Clean any soil from the oven frame and the door liner, but avoid cleaning the oven door gasket. These areas heat sufficiently during self-cleaning cycle to burn soil on. Clean with soap and water. Remove the oven racks, broiler pan and insert, all utensils and any foil. These items do not withstand high cleaning temperatures

Make sure the clock shows the correct time of day. Push the CLEAN button "---"will appear on display. Push the up arrow button until "3:00" appears for a 3 hour clean cycle or push the down arrow until "2:00" is displayed for a 2 hour clean cycle. Once the time is selected and released CLn will appear on the display. The door will then automatically lock and the LOCK indicator light will flash. Do not open the door while the indicator is flashing, usually about 15 seconds. The LOCK display will stay until the cleaning cycle is complete or cancelled, and the oven temperature has cooled to a safe temperature.

In the event you need to stop the cycle at any point, simply push the CLEAR OFF button and the door will automatically lock once the oven has cooled, usually about an hour.

Best of luck,

Its got a drain somewhere can you find the sound?

Set back on self clean, then after about a minute, switch off. The lock should disengage.

Super shock your pool ... take it to around 20 ppm CL using liquid or powdered CL. Brush your pool daily for several days ... run your filter at least 16 hours a day ... 24/7 would be better. Maintain 5 ppm CL and brush weekly after you get the algae under control.

Re the light:
When the «cartridge» light starts flashing, the remaining fluid in the cartridge is sufficient for approximately 5 more cleaning cycles. After these 5 cycles, the cleaning performance will be reduced and the cartridge has to be replaced.
When the «cartridge» light illuminates constantly, the cleaning function is locked and a new cartridge has to be installed.
Only then, the next cleaning cycle can be started.
.
To find a replacement, Refer to http://braun.com/ to find the website for your country.

Otherwise, refer to http://braun.com/us/consumer-service.html which will help you locate a local Service Center.

Mode number for the cartridge is CCR2

Use the CD/DVD cleaner CD with fine bristles which can be used dry or with some cleaning fluid which in turn will clean the optical lens. Do 2 runs, 1 dry 2 with the liquid and try to play it.......sodeep

You have probably clipped the data line for the computer. This is not a fix!! Just putting bandages where stitches belong!! Any questions just shoot back

does it still have water in it? if yes, then you must clean the pump out.

You can click on the link below. Get the one with USA or E for English

SH02SH03SH04SH08&frmTyp=subgrp">http://www.service.braun.com/product/product.asp?rg=NA&c=US&l=GB&typ=ui&s=8985&seite=&sString=5649|SH|SH01|S|360%C2%B0+Complete%2C+Series+5&subgrp=360°%20Complete%20-%208000%20series,%20Series%205&grp=SH01<|>SH02<|>SH03<|>SH04<|>SH08<|>&frmTyp=subgrp

The low detergent light comes on because the dishwasher recognizes the powder or liquid wash detergent.

In the Tablet form the dishwasher things you do not have enough becasue the tablets are condensed tightly. I use the tablets and I ignore the low detergent light entirely. The tablet is good for ONE wash and is sufficient.

If your dishes are not coming clean, I recommend that you prewash or scrape dishes ahead of time.