Question about Hoover Washing Machines
Posted by Anonymous on
Its not an error it means its in delay start mode. Hold down the delay start button (looks like a clock) for 5 seconds and it should clear
Posted on Aug 25, 2013
It's not an error it's just the delayed timer if it's 'F01".
Posted on Jan 25, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: error code E11 on hoover
Error code E11 is a dryer thermostat problem. The wiring, by design, is too short, and secured too tightly up and behind the digital display, and extends to a connector located on the machine's drum housing. When the machine is in motion, and there is a degree of drum movement back and forth, left to right, the wire disconnects resulting in Error code E11. Your issue may be that the wire is loose, and not fully disconnected (yet) hence the fault being intermittent. Error code E11 requires a service engineer to reattach the thermostat wiring in a way that allows for the drum housing to move, as per it's design, without the wire being disconnected from the drum housing connector, when the wash load becomes unbalanced during the wash cycle.
Posted on Dec 23, 2010
Tips for a great answer:
Oct 05, 2016 | Hoover VHC391 T-80 Dryer
Oct 14, 2015 | Hoover Washing Machines
Sep 09, 2015 | Hoover Washing Machines
Jan 15, 2013 | Hoover Nextra 160 HNWF 3137 Front Load...
Nov 18, 2012 | Washing Machines
Oct 21, 2012 | Washing Machines
Dec 20, 2010 | Washing Machines
Nov 12, 2010 | Hoover Washing Machines
Jul 31, 2007 | Hoover Nextra HNWL 3136 Front Load Washer...
3,860 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: