I need my unlacked

Good day Jose
If you are stuck at the computer "Locked" screen then you will have to press the Ctrl, Alt and Delete keys simultaneously to be able to type your password to unlock your screen.

A simple way to check is by inserting other network's simcards with the iPhone 4 and if it works without any problem then the iPhone is unlocked...if it shows any error messages like "Invalid sim"or "Error sim" then the phone is locked with a particular network.To remove the network lock you can approach Onlinegsmunlock.com and remove the network lock permanently using their remote unlock service.If you have any doubt with what network the mobile is locked too...you can use their contact us form to get the respective details.

you can get unlock code for HTC Sense bythird party online websites

IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

you may visit some unlock codes sites...........

you could call the 1800 number for AT&T number and ask them to help you unlock it for free

unfortunatly w350 is pnx platform and no way of unlocking for free

Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

You might have a phone with 900/1800 frequencies. You need 850/1900 for the USA. Please do *#0000# and let me know the model and the firmware (RM or RH) number and I can then tell you if that is so.

The default security code is 12345. If it doesnt work remove your battery for 15min and try the code again. Still the same?the code has most probably been changed. Dont remember the code?Best to refer to a Nokia Service centre for a code reset :)